[Sat May 11 14:19:21 2013] Detection parameters:
  Position = (297.5, 379.6) = 0 25 7.22 64 14 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 384.2 +/- 29.4
  Background counts = 326.3
  Rate = 0.02 +/- 0.002

[Sat May 11 14:19:28 2013] Off-axis axis estimate = 5.88'
[Sat May 11 14:36:33 2013] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Sat May 11 14:36:33 2013] Initial guess for spatial extent in simple fitting = 9.37"
[Sat May 11 14:36:33 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.674
[Sat May 11 14:36:33 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 9.37"
[Tue May 14 18:12:02 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96.ximg exists
[Tue May 14 18:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96.csv
[Tue May 14 18:12:02 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96_1.ximg exists
[Tue May 14 18:12:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96.csv
[Tue May 14 18:12:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 18:12:04 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Tue May 14 18:12:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Tue May 14 18:12:04 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Tue May 14 18:12:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Tue May 14 18:12:04 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:03 2013] Source 104 is offset by 2.567379 and 7.419127 pixels which is larger than
2 X fitted extent = 1.060492 x 1.060492, not incorporating fit results
[Tue May 21 15:10:03 2013] Warning: source 96 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 104 at 13.491791 pixels away
[Tue May 21 15:10:03 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:03 2013] Assessing source extent using major
[Tue May 21 15:10:03 2013] Source does appear to be extended
[Tue May 21 15:10:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 15:10:03 2013] Source is confused with source 97
[Tue May 21 15:10:59 2013] Using EEF radius (= 9.37 ")to estimate initial spatial extent for simple fitting
[Tue May 21 15:10:59 2013] Initial guess for spatial extent in simple fitting = 9.37"
[Tue May 21 15:10:59 2013] source mask rpix=2.2, npix_max = 28, mask sum = 19, frac = 0.674
[Tue May 21 15:10:59 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 9.37"
[Mon May 27 20:33:43 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73.ximg exists
[Mon May 27 20:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73.csv
[Mon May 27 20:33:43 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73_1.ximg exists
[Mon May 27 20:33:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73.csv
[Mon May 27 20:33:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Mon May 27 20:33:45 2013] fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Mon May 27 20:33:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Mon May 27 20:33:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:56:25 2013] Spatial fit model total counts = 5472.350000, observed total counts = 4002.000000
[Sun Jun  2 15:56:25 2013] Poor agreement between spatial fit and data for source 104
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 15:56:25 2013] Warning, spatial fit 73 centroid is now closest to src. 97
[Sun Jun  2 15:56:25 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:25 2013] Assessing source extent using major
[Sun Jun  2 15:56:25 2013] Source does appear to be extended
[Sun Jun  2 15:56:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 15:57:25 2013] XMMSAS src. selection expression = ellipse(25833.245972, 32973.041901, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  2 15:57:25 2013] Writing source region out to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_src.reg
[Sun Jun  2 15:57:25 2013] Extracting stamp from image fullrun_pn_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (260, 342) - (335, 417)
[Sun Jun  2 15:57:25 2013] XMMSAS bgd. selection expression = annulus(25833.245972, 32973.041901, 1087.500000, 2175.000000, X, Y) && !ellipse(27833.783800, 27311.322600, 3539.688102, 3539.688102, 0.000000, X, Y) && !ellipse(26816.534800, 27966.734000, 7122.480205, 5520.000159, 46.929400, X, Y) && !ellipse(23836.464000, 29353.388200, 3871.704111, 3871.704111, 0.000000, X, Y) && !ellipse(24983.124800, 29259.211000, 3725.496107, 3725.496107, 0.000000, X, Y) && !ellipse(21547.927795, 28665.187836, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25910.573400, 28646.635000, 7268.208209, 5615.352162, 28.966000, X, Y) && !ellipse(25723.809800, 28183.756000, 3468.288100, 3468.288100, 0.000000, X, Y) && !ellipse(23011.540000, 28534.900000, 3854.232111, 3854.232111, 0.000000, X, Y) && !ellipse(26953.208000, 27478.524000, 6449.664186, 6449.664186, 0.000000, X, Y) && !ellipse(22322.170000, 23375.350000, 7992.000230, 7992.000230, 0.000000, X, Y) && !ellipse(22220.049789, 29211.789337, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27483.365265, 34580.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23830.416656, 32723.583313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28269.973450, 35622.184998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26590.518738, 32361.275360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24915.572266, 32226.328186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.946564, 31956.221436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.535004, 33825.431091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26219.356262, 33385.070587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27522.917236, 33096.540588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.747131, 32582.059631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27352.358154, 31698.380920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28672.125427, 30396.622711, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 15:57:25 2013] Writing fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104.gif
[Mon Jun  3 05:40:13 2013] Mean detx,y = (3921.68, 6538.56) 
[Mon Jun  3 05:40:20 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun  3 05:41:09 2013] Binned source spectrum to 10 counts/bin
[Mon Jun  3 05:41:10 2013] Setting source spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Mon Jun  3 05:41:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Wed Jun  5 10:20:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun  5 10:20:41 2013] rmf not generated due to insufficient counts
[Sat Jun 15 13:43:47 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:43:47 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_src_b10.pi.gz = 2974.00
[Sat Jun 15 13:43:47 2013] Total counts from fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_bgd.pi.gz = 1459.00
[Sat Jun 15 13:43:48 2013] Got source and background scale factors 1021618.000000, 1259907.000000
[Sat Jun 15 13:43:48 2013] User source parameters:
  Position = (297.5, 379.6) = 0 25 7.22 64 14 35.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1790.9 +/- 55.5
  Background aperture counts = 1183.1
  Rate = 0.06 +/- 0.002

[Sat Jun 15 13:43:48 2013] Updating counts from extracted products
[Sat Jun 15 13:43:48 2013] Set source signif. to 1790.94/34.40 = 52.07
[Sat Jun 15 13:44:03 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:44:03 2013] Using photon index=1.80, rate=0.0563, arf fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104.arf
[Sat Jun 15 13:44:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:44:03 2013] Updating source flux to 4.6e-13
[Sat Jun 15 13:47:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 15 13:48:17 2013] xmm0412380201/analysis//spectral/fullrun_pn_xmm0412380201_pi300-10000_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete