[Sat May 11 14:19:37 2013] Detection parameters:
  Position = (241.7, 358.8) = 0 25 44.39 64 13 8.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.5 +/- 21.0
  Background counts = 139.4
  Rate = 0.004 +/- 0.0007

[Sat May 11 14:19:38 2013] Off-axis axis estimate = 6.01'
[Tue May 14 18:12:04 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Tue May 14 18:12:04 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Tue May 14 18:12:04 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.053
[Tue May 14 18:12:04 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 9.43"
[Fri May 17 11:42:39 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83.ximg exists
[Fri May 17 11:42:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83.csv
[Fri May 17 11:42:39 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83_1.ximg exists
[Fri May 17 11:42:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83.csv
[Fri May 17 11:42:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 11:42:42 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Fri May 17 11:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri May 17 11:42:42 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Fri May 17 11:42:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83.csv
[Fri May 17 11:42:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:22 2013] Spatial fit model total counts = 3483.110000, observed total counts = 3471.000000
[Tue May 21 15:10:22 2013] Offset between fit and detection position for source 80 = 1.288178 pixels
[Tue May 21 15:10:22 2013] Warning, changing simple spatial fit ID from 83 to 73
[Tue May 21 15:10:22 2013] 3285.072000 total counts/ 2908.730000 bgd. counts: snr = 6.978000
Spatial fit parameters:
  Offset between fit and detection position for source 80 = 1.288178 pixels
  Position = (242.3, 360.0) = 0 25 44.04 64 13 14.6
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 376.3 +/- 57.3
  Background counts = 2908.7
  Rate = 0.01 +/- 0.002
[Tue May 21 15:10:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 15:10:22 2013] Source does appear to be extended
[Tue May 21 15:10:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:33:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 20:33:45 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 27 20:33:45 2013] Initial guess for spatial extent in simple fitting = 18.20"
[Mon May 27 20:33:45 2013] source mask rpix=4.2, npix_max = 87, mask sum = 87, frac = 0.992
[Mon May 27 20:33:45 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 18.20"
[Thu May 30 07:39:23 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72.ximg exists
[Thu May 30 07:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72.csv
[Thu May 30 07:39:23 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72_1.ximg exists
[Thu May 30 07:39:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72.csv
[Thu May 30 07:39:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:39:27 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Thu May 30 07:39:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Thu May 30 07:39:27 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Thu May 30 07:39:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72.csv
[Thu May 30 07:39:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:56:43 2013] Warning, spatial fit 72 centroid is now closest to src. 3
[Sun Jun  2 15:56:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:43 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 15:56:43 2013] Source does appear to be extended
[Sun Jun  2 15:56:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 10:26:52 2013] XMMSAS src. selection expression = ellipse(21028.994000, 31272.604000, 1091.736031, 1091.736031, 0.000000, X, Y)
[Wed Jun  5 10:26:52 2013] Writing source region out to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_src.reg
[Wed Jun  5 10:26:52 2013] Extracting stamp from image fullrun_mos1_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (180, 297) - (305, 423)
[Wed Jun  5 10:26:53 2013] XMMSAS bgd. selection expression = annulus(21028.994000, 31272.604000, 1819.560052, 3639.120105, X, Y) && !ellipse(26190.652000, 28374.582000, 3634.224105, 3634.224105, 0.000000, X, Y) && !ellipse(27817.387600, 27070.914000, 3494.448101, 3494.448101, 0.000000, X, Y) && !ellipse(25909.689575, 28657.990051, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24337.244000, 29970.170000, 7811.568225, 7811.568225, 0.000000, X, Y) && !ellipse(24922.476000, 29371.002000, 7483.392215, 6738.600194, 33.648300, X, Y) && !ellipse(23172.682000, 29378.563800, 3984.072115, 3984.072115, 0.000000, X, Y) && !ellipse(28126.332000, 25370.746600, 6345.912183, 6345.912183, 0.000000, X, Y) && !ellipse(28519.390000, 26419.586000, 7103.520204, 7103.520204, 0.000000, X, Y) && !ellipse(22002.446000, 28733.327540, 8151.024235, 5127.888148, 316.753500, X, Y) && !ellipse(28371.808000, 24351.952000, 7319.424211, 7319.424211, 0.000000, X, Y) && !ellipse(28556.901400, 26040.090000, 7198.800207, 7010.952202, 91.641910, X, Y) && !ellipse(24597.724000, 21286.567200, 7964.808229, 5153.736148, 26.236700, X, Y) && !ellipse(22870.446000, 29137.196000, 7968.144229, 5044.920145, 334.939000, X, Y) && !ellipse(23083.734000, 27734.118000, 7357.584212, 7357.584212, -0.000000, X, Y) && !ellipse(19757.824880, 25407.542000, 8528.112245, 7897.584227, 290.667000, X, Y) && !ellipse(23625.719340, 26925.155800, 3584.016103, 3584.016103, 0.000000, X, Y) && !ellipse(26096.888000, 27991.250000, 3429.792099, 3429.792099, 0.000000, X, Y) && !ellipse(20848.624000, 27708.436000, 4198.032121, 4198.032121, 0.000000, X, Y) && !ellipse(27140.624530, 24484.018000, 5075.592146, 5075.592146, 0.000000, X, Y) && !ellipse(26099.633400, 24160.495200, 6871.488198, 3508.512101, 81.972860, X, Y) && !ellipse(24074.078000, 25056.926000, 6853.440197, 6853.440197, 0.000000, X, Y) && !ellipse(23864.730000, 21994.680000, 7847.472226, 7847.472226, 0.000000, X, Y) && !ellipse(19256.544000, 25122.306000, 4320.576124, 4320.576124, 225.772000, X, Y) && !ellipse(22110.196000, 26153.460000, 8135.808234, 7546.848217, 75.997800, X, Y) && !ellipse(26546.058000, 26874.182000, 3227.304093, 3227.304093, 0.000000, X, Y) && !ellipse(21382.192000, 26508.816000, 4067.904117, 4067.904117, 0.000000, X, Y) && !ellipse(26771.170000, 22627.488000, 7240.992208, 7240.992208, 0.000000, X, Y) && !ellipse(22191.176000, 26388.644000, 7612.704219, 6221.856179, 223.692000, X, Y) && !ellipse(20138.450600, 22371.003560, 5410.800156, 2321.347267, 61.795900, X, Y) && !ellipse(20484.623710, 27485.980000, 4191.456121, 4191.456121, 0.000000, X, Y) && !ellipse(24983.584600, 26989.463200, 3369.888097, 3369.888097, 0.000000, X, Y) && !ellipse(22773.430000, 22825.540000, 8043.744231, 8043.744231, 0.000000, X, Y) && !ellipse(27172.470000, 24941.170000, 3520.320101, 3520.320101, 0.000000, X, Y) && !ellipse(22219.140000, 23687.168000, 8185.200236, 6555.288189, 57.164100, X, Y) && !ellipse(25192.924000, 26375.166000, 6409.344184, 6409.344184, 0.000000, X, Y) && !ellipse(23575.816400, 27314.836000, 3678.792106, 3678.792106, 0.000000, X, Y) && !ellipse(23743.197400, 26767.115200, 7168.032206, 5329.968153, 52.929900, X, Y) && !ellipse(22152.836000, 24119.130000, 7660.416220, 5854.920168, 35.122100, X, Y) && !ellipse(20617.408600, 28821.162080, 765.305622, 439.988013, 89.773057, X, Y) && !ellipse(23608.018000, 20924.030000, 8141.328234, 8141.328234, 0.000000, X, Y) && !ellipse(24703.826000, 23487.246000, 7181.952207, 4479.528129, 55.472900, X, Y)
[Wed Jun  5 10:26:53 2013] Writing fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80.gif
[Wed Jun  5 16:39:00 2013] Mean detx,y = (-1918.00, 5636.02) 
[Wed Jun  5 16:39:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 16:39:51 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 16:39:51 2013] Setting source spectrum file to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_src_b10.pi.gz
[Wed Jun  5 16:39:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Sat Jun 15 13:44:50 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:44:50 2013] Total counts from fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_src_b10.pi.gz = 3641.00
[Sat Jun 15 13:44:50 2013] Total counts from fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_bgd.pi.gz = 0.00
[Sat Jun 15 13:44:51 2013] Got source and background scale factors 3342757.000000, 0.000000
[Sat Jun 15 13:44:51 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 15 13:45:01 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:45:01 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80.arf
[Sat Jun 15 13:45:01 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:45:01 2013] Updating source flux to 1.9e-13
[Sat Jun 15 13:47:00 2013] xmm0412380201/analysis//spectral/fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete