[Sat May 11 14:19:33 2013] Detection parameters:
  Position = (226.1, 273.2) = 0 25 54.66 64 6 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10139.2 +/- 142.2
  Background counts = 261.4
  Rate = 0.4 +/- 0.005

[Sat May 11 14:19:38 2013] Off-axis axis estimate = 5.56'
[Tue May 14 18:12:04 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Tue May 14 18:12:04 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Tue May 14 18:12:04 2013] source mask rpix=2.1, npix_max = 27, mask sum = 18, frac = 0.657
[Tue May 14 18:12:04 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.21"
[Fri May 17 11:42:38 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26.ximg exists
[Fri May 17 11:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26.csv
[Fri May 17 11:42:38 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri May 17 11:42:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26.csv
[Fri May 17 11:42:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 17 11:42:40 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri May 17 11:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 17 11:42:40 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri May 17 11:42:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri May 17 11:42:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 15:10:22 2013] Spatial fit model total counts = 49483.300000, observed total counts = 43479.000000
[Tue May 21 15:10:22 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 15:10:22 2013] Spatial fit model total counts = 36148.200000, observed total counts = 33838.000000
[Tue May 21 15:10:22 2013] Offset between fit and detection position for source 44 = 3.550997 pixels
[Tue May 21 15:10:22 2013] Warning, changing simple spatial fit ID from 26 to 53
[Tue May 21 15:10:22 2013] 38294.800000 total counts/ 25600.000000 bgd. counts: snr = 79.342500
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.550997 pixels
  Position = (226.0, 269.7) = 0 25 54.72 64 6 41.5
  Extent = 16.6 (16.6-16.6)" x 10.5 (10.5-10.5)", rotation angle = 75 (75-75) degrees
  Source counts = 12694.8 +/- 195.7
  Background counts = 25600.0
  Rate = 0.4 +/- 0.006
[Tue May 21 15:10:22 2013] Vigneting correction estimate = 1.000000
[Tue May 21 15:10:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 15:10:22 2013] Assessing source extent using major axis lower bound
[Tue May 21 15:10:22 2013] Source does appear to be extended
[Tue May 21 15:10:22 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.58
[Tue May 21 15:10:22 2013] Source is asymmetric
[Tue May 21 15:10:22 2013] Source is confused with source 61
[Tue May 21 15:10:22 2013] Source is confused with source 55
[Mon May 27 20:33:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 27 20:33:45 2013] Initial guess for spatial extent in simple fitting = 13.52"
[Mon May 27 20:33:45 2013] source mask rpix=3.1, npix_max = 52, mask sum = 35, frac = 0.672
[Mon May 27 20:33:45 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 13.52"
[Thu May 30 07:39:21 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26.ximg exists
[Thu May 30 07:39:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26.csv
[Thu May 30 07:39:21 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu May 30 07:39:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26.csv
[Thu May 30 07:39:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 07:39:25 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu May 30 07:39:25 2013] fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May 30 07:39:25 2013] Fit fullrun_mos1_xmm0412380201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Jun  2 15:56:43 2013] Spatial fit model total counts = 52116.500000, observed total counts = 47980.000000
[Sun Jun  2 15:56:43 2013] Offset between fit and detection position for source 44 = 0.669766 pixels
[Sun Jun  2 15:56:43 2013] 49725.900000 total counts/ 36100.000000 bgd. counts: snr = 71.715263
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.669766 pixels
  Position = (226.4, 269.2) = 0 25 54.43 64 6 39.3
  Extent = 14.6 (14.6-14.6)", rotation angle = 0
  Source counts = 13625.9 +/- 223.0
  Background counts = 36100.0
  Rate = 0.4 +/- 0.006
[Sun Jun  2 15:56:43 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 15:56:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 15:56:43 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 15:56:43 2013] Source does appear to be extended
[Sun Jun  2 15:56:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun  5 10:26:46 2013] Counts = 13625.900000, rescaling region sizes by 3.000000
[Wed Jun  5 10:26:46 2013] XMMSAS src. selection expression = ellipse(19648.764000, 23370.319400, 2619.594075, 2619.594075, 0.000000, X, Y)
[Wed Jun  5 10:26:46 2013] Writing source region out to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_src.reg
[Wed Jun  5 10:26:46 2013] Extracting stamp from image fullrun_mos1_xmm0412380201_pi300-10000_cl_sm2.00.img.gz, (76, 119) - (377, 420)
[Wed Jun  5 10:26:46 2013] XMMSAS bgd. selection expression = annulus(19648.764000, 23370.319400, 13097.970377, 26195.940754, X, Y) && !ellipse(26190.652000, 28374.582000, 3634.224105, 3634.224105, 0.000000, X, Y) && !ellipse(27817.387600, 27070.914000, 3494.448101, 3494.448101, 0.000000, X, Y) && !ellipse(25909.689575, 28657.990051, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24337.244000, 29970.170000, 7811.568225, 7811.568225, 0.000000, X, Y) && !ellipse(24922.476000, 29371.002000, 7483.392215, 6738.600194, 33.648300, X, Y) && !ellipse(23172.682000, 29378.563800, 3984.072115, 3984.072115, 0.000000, X, Y) && !ellipse(28126.332000, 25370.746600, 6345.912183, 6345.912183, 0.000000, X, Y) && !ellipse(28519.390000, 26419.586000, 7103.520204, 7103.520204, 0.000000, X, Y) && !ellipse(22002.446000, 28733.327540, 8151.024235, 5127.888148, 316.753500, X, Y) && !ellipse(28371.808000, 24351.952000, 7319.424211, 7319.424211, 0.000000, X, Y) && !ellipse(28061.650000, 22975.820000, 3850.152111, 3850.152111, 0.000000, X, Y) && !ellipse(28556.901400, 26040.090000, 7198.800207, 7010.952202, 91.641910, X, Y) && !ellipse(24597.724000, 21286.567200, 7964.808229, 5153.736148, 26.236700, X, Y) && !ellipse(22870.446000, 29137.196000, 7968.144229, 5044.920145, 334.939000, X, Y) && !ellipse(27935.537600, 23555.294400, 3659.712105, 3659.712105, 0.000000, X, Y) && !ellipse(26675.491200, 21547.930000, 3943.248113, 3943.248113, 0.000000, X, Y) && !ellipse(23824.085000, 21039.825600, 4133.160119, 4133.160119, 0.000000, X, Y) && !ellipse(23083.734000, 27734.118000, 7357.584212, 7357.584212, -0.000000, X, Y) && !ellipse(19757.824880, 25407.542000, 8528.112245, 7897.584227, 290.667000, X, Y) && !ellipse(23625.719340, 26925.155800, 3584.016103, 3584.016103, 0.000000, X, Y) && !ellipse(26096.888000, 27991.250000, 3429.792099, 3429.792099, 0.000000, X, Y) && !ellipse(20848.624000, 27708.436000, 4198.032121, 4198.032121, 0.000000, X, Y) && !ellipse(23881.579071, 21699.706528, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27140.624530, 24484.018000, 5075.592146, 5075.592146, 0.000000, X, Y) && !ellipse(26099.633400, 24160.495200, 6871.488198, 3508.512101, 81.972860, X, Y) && !ellipse(24074.078000, 25056.926000, 6853.440197, 6853.440197, 0.000000, X, Y) && !ellipse(25946.555140, 24701.305600, 1113.136032, 445.271213, 47.372500, X, Y) && !ellipse(23864.730000, 21994.680000, 7847.472226, 7847.472226, 0.000000, X, Y) && !ellipse(19256.544000, 25122.306000, 4320.576124, 4320.576124, 225.772000, X, Y) && !ellipse(22110.196000, 26153.460000, 8135.808234, 7546.848217, 75.997800, X, Y) && !ellipse(19959.207382, 23348.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26546.058000, 26874.182000, 3227.304093, 3227.304093, 0.000000, X, Y) && !ellipse(22354.901400, 21831.377400, 4197.360121, 4197.360121, 0.000000, X, Y) && !ellipse(21382.192000, 26508.816000, 4067.904117, 4067.904117, 0.000000, X, Y) && !ellipse(26771.170000, 22627.488000, 7240.992208, 7240.992208, 0.000000, X, Y) && !ellipse(22191.176000, 26388.644000, 7612.704219, 6221.856179, 223.692000, X, Y) && !ellipse(20138.450600, 22371.003560, 5410.800156, 2321.347267, 61.795900, X, Y) && !ellipse(20484.623710, 27485.980000, 4191.456121, 4191.456121, 0.000000, X, Y) && !ellipse(25982.235596, 25542.621155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.584600, 26989.463200, 3369.888097, 3369.888097, 0.000000, X, Y) && !ellipse(23266.590000, 24570.745134, 1233.200035, 921.168027, 80.585610, X, Y) && !ellipse(22773.430000, 22825.540000, 8043.744231, 8043.744231, 0.000000, X, Y) && !ellipse(25579.324000, 26135.746000, 1053.824030, 1053.824030, 0.000000, X, Y) && !ellipse(27172.470000, 24941.170000, 3520.320101, 3520.320101, 0.000000, X, Y) && !ellipse(22219.140000, 23687.168000, 8185.200236, 6555.288189, 57.164100, X, Y) && !ellipse(26310.426422, 23265.965393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25151.978000, 21973.610000, 3826.440110, 3826.440110, 0.000000, X, Y) && !ellipse(25192.924000, 26375.166000, 6409.344184, 6409.344184, 0.000000, X, Y) && !ellipse(23575.816400, 27314.836000, 3678.792106, 3678.792106, 0.000000, X, Y) && !ellipse(22420.040000, 22992.992000, 4008.336115, 4008.336115, 0.000000, X, Y) && !ellipse(23544.564000, 22825.246800, 3923.736113, 3923.736113, 0.000000, X, Y) && !ellipse(19584.470000, 23436.128000, 3078.624089, 3045.504088, 357.244100, X, Y) && !ellipse(24496.006000, 23831.176000, 1196.992034, 1196.992034, 0.000000, X, Y) && !ellipse(22827.240000, 25714.586000, 1268.784037, 1268.784037, 0.000000, X, Y) && !ellipse(23743.197400, 26767.115200, 7168.032206, 5329.968153, 52.929900, X, Y) && !ellipse(21882.026000, 23170.634000, 1364.336039, 1364.336039, 0.000000, X, Y) && !ellipse(22152.836000, 24119.130000, 7660.416220, 5854.920168, 35.122100, X, Y) && !ellipse(20617.408600, 28821.162080, 765.305622, 439.988013, 89.773057, X, Y) && !ellipse(24628.116800, 25046.354800, 1129.144032, 767.301622, 90.000000, X, Y) && !ellipse(21966.112400, 24407.888000, 1302.168037, 895.104026, 28.022100, X, Y) && !ellipse(23608.018000, 20924.030000, 8141.328234, 8141.328234, 0.000000, X, Y) && !ellipse(21968.778000, 22898.768000, 1364.336039, 1364.336039, 0.000000, X, Y) && !ellipse(22398.320000, 25189.316000, 1279.648037, 648.129619, 38.765100, X, Y) && !ellipse(24671.766000, 25721.794000, 1142.240033, 1142.240033, 0.000000, X, Y) && !ellipse(21563.090000, 24377.224000, 1330.624038, 1330.624038, 0.000000, X, Y) && !ellipse(24476.353424, 23108.094696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.826000, 23487.246000, 7181.952207, 4479.528129, 55.472900, X, Y) && !ellipse(20834.177597, 25006.663666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23296.650000, 21358.492000, 4070.664117, 4070.664117, 209.862000, X, Y) && !ellipse(27179.260000, 29487.748000, 1333.280038, 1333.280038, 0.000000, X, Y) && !ellipse(21028.994000, 31272.604000, 1455.648042, 1455.648042, 0.000000, X, Y)
[Wed Jun  5 10:26:46 2013] Writing fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44.gif
[Wed Jun  5 13:03:13 2013] Mean detx,y = (3884.17, 1187.80) 
[Wed Jun  5 13:03:17 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun  5 13:12:13 2013] Binned source spectrum to 10 counts/bin
[Wed Jun  5 13:12:13 2013] Setting source spectrum file to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Jun  5 13:12:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jun 15 13:44:20 2013] Updating aperture counts using extracted products
[Sat Jun 15 13:44:20 2013] Total counts from fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 226638.00
[Sat Jun 15 13:44:20 2013] Total counts from fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_bgd.pi.gz = 28267.00
[Sat Jun 15 13:44:20 2013] Got source and background scale factors 19603000.000000, 209024098.000000
[Sat Jun 15 13:44:21 2013] User source parameters:
  Position = (226.4, 269.2) = 0 25 54.43 64 6 39.3
  Extent = 14.6 (14.6-14.6)", rotation angle = 0
  Source aperture counts = 223987.0 +/- 477.1
  Background aperture counts = 2651.0
  Rate = 6 +/- 0.01

[Sat Jun 15 13:44:54 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 13:44:54 2013] Using photon index=1.80, rate=0.395, arf fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44.arf
[Sat Jun 15 13:44:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 13:44:54 2013] Updating source flux to 6.8e-12
[Sat Jun 15 13:45:51 2013] Flag p found in src. 44 procflags, skipping spectral fitting
[Sat Jun 15 13:45:51 2013] Flag c found in src. 44 procflags, skipping spectral fitting
[Sat Jun 15 13:47:00 2013] xmm0412380201/analysis//spectral/fullrun_mos1_xmm0412380201_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete