[Sat Aug 18 08:37:03 2012] Detection parameters: Position = (370.5, 319.1) = 0 24 18.51 64 10 19.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 166.5 +/- 32.7 Background counts = 535.8 Rate = 0.01 +/- 0.002 [Sat Aug 18 08:37:04 2012] Off-axis axis estimate = 5.44' [Sat Aug 18 08:51:49 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Sat Aug 18 08:51:49 2012] Initial guess for spatial extent in simple fitting = 9.15" [Sat Aug 18 08:51:49 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.923 [Sat Aug 18 08:51:49 2012] Giving source the simple spatial ID 83 for pass 0, mean size = 9.15" [Sun Aug 19 21:47:03 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83.ximg exists [Sun Aug 19 21:47:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83.csv [Sun Aug 19 21:47:03 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83_1.ximg exists [Sun Aug 19 21:47:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83.csv [Sun Aug 19 21:47:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 19 21:47:05 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists [Sun Aug 19 21:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83.csv [Sun Aug 19 21:47:06 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists [Sun Aug 19 21:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83.csv [Sun Aug 19 21:47:06 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 26 22:07:10 2012] Warning: source 83 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 12.196801 pixels away [Sun Aug 26 22:07:10 2012] Source 91 is offset by 7.682997 and 3.291426 pixels which is larger than 2 X fitted extent = 0.978400 x 0.978400, not incorporating fit results [Sun Aug 26 22:07:10 2012] Vigneting correction estimate = 1.000000 [Sun Aug 26 22:07:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 26 22:07:10 2012] Assessing source extent using major [Sun Aug 26 22:07:10 2012] Source does appear to be extended [Sun Aug 26 22:07:10 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 26 22:07:10 2012] Deleting source due to low Poisson probability 0.9