[Sat Aug 18 08:37:02 2012] Detection parameters: Position = (410.6, 388.6) = 0 23 51.61 64 15 18.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 174.5 +/- 31.9 Background counts = 461.9 Rate = 0.006 +/- 0.001 [Sat Aug 18 08:37:04 2012] Off-axis axis estimate = 10.43' [Sat Aug 18 08:51:49 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Sat Aug 18 08:51:49 2012] Initial guess for spatial extent in simple fitting = 11.65" [Sat Aug 18 08:51:49 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.214 [Sat Aug 18 08:51:49 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 11.65" [Sun Aug 19 21:47:03 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67.ximg exists [Sun Aug 19 21:47:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67.csv [Sun Aug 19 21:47:03 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67_1.ximg exists [Sun Aug 19 21:47:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67.csv [Sun Aug 19 21:47:03 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 19 21:47:05 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists [Sun Aug 19 21:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67.csv [Sun Aug 19 21:47:05 2012] fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists [Sun Aug 19 21:47:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67.csv [Sun Aug 19 21:47:05 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 26 22:07:10 2012] Source 75 is offset by -5.324565 and -1.448323 pixels which is larger than 2 X fitted extent = 1.261071 x 1.261071, not incorporating fit results [Sun Aug 26 22:07:10 2012] Source 75 is offset by 4.452424 and 8.212596 pixels which is larger than 2 X fitted extent = 6.644092 x 6.644092, not incorporating fit results [Sun Aug 26 22:07:10 2012] Vigneting correction estimate = 1.000000 [Sun Aug 26 22:07:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Aug 26 22:07:10 2012] Assessing source extent using major [Sun Aug 26 22:07:10 2012] Source does appear to be extended [Sun Aug 26 22:07:10 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Aug 26 22:07:10 2012] Deleting source due to low Poisson probability 0.9