[Sat Aug 18 08:38:24 2012] Detection parameters:
  Position = (236.4, 253.7) = 0 25 47.68 64 5 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3509.2 +/- 78.5
  Background counts = 234.2
  Rate = 0.2 +/- 0.004

[Sat Aug 18 08:38:25 2012] Off-axis axis estimate = 5.55'
[Thu Aug 23 17:35:13 2012] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:35:13 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Aug 23 17:35:13 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.768
[Thu Aug 23 17:35:13 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 9.20"
[Sun Aug 26 22:06:47 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58.ximg exists
[Sun Aug 26 22:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58.csv
[Sun Aug 26 22:06:47 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun Aug 26 22:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58.csv
[Sun Aug 26 22:06:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:06:49 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun Aug 26 22:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Aug 26 22:06:49 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun Aug 26 22:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Aug 26 22:06:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:07:38 2012] Source 60 is offset by 4.089612 and -3.285860 pixels which is larger than
2 X fitted extent = 2.746219 x 2.746219, not incorporating fit results
[Sun Aug 26 22:07:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 22:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 22:07:38 2012] Assessing source extent using major
[Sun Aug 26 22:07:38 2012] Source does appear to be extended
[Sun Aug 26 22:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00