[Sat Aug 18 08:38:23 2012] Detection parameters:
  Position = (240.9, 288.0) = 0 25 44.73 64 8 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3710.3 +/- 86.4
  Background counts = 336.1
  Rate = 0.1 +/- 0.003

[Sat Aug 18 08:38:25 2012] Off-axis axis estimate = 4.24'
[Thu Aug 23 17:35:13 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 17:35:13 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Thu Aug 23 17:35:13 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.823
[Thu Aug 23 17:35:13 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 8.55"
[Sun Aug 26 22:06:47 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62.ximg exists
[Sun Aug 26 22:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62.csv
[Sun Aug 26 22:06:47 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62_1.ximg exists
[Sun Aug 26 22:06:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62.csv
[Sun Aug 26 22:06:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:06:49 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sun Aug 26 22:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sun Aug 26 22:06:49 2012] fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sun Aug 26 22:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Sun Aug 26 22:06:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:07:38 2012] Spatial fit model total counts = 18646.200000, observed total counts = 29743.000000
[Sun Aug 26 22:07:38 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 22:07:38 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 22:07:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 22:07:38 2012] Assessing source extent using major
[Sun Aug 26 22:07:38 2012] Source does appear to be extended
[Sun Aug 26 22:07:38 2012] Computing asymmetry using major and minor axis, asym = 1.00