[Sat Aug 18 08:37:45 2012] Detection parameters:
  Position = (263.0, 241.9) = 0 25 30.03 64 4 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3273.0 +/- 84.8
  Background counts = 253.7
  Rate = 0.2 +/- 0.004

[Sat Aug 18 08:37:46 2012] Off-axis axis estimate = 4.84'
[Sun Aug 19 21:47:06 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 21:47:06 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sun Aug 19 21:47:06 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.817
[Sun Aug 19 21:47:06 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 8.85"
[Thu Aug 23 17:35:10 2012] fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55.ximg exists
[Thu Aug 23 17:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55.csv
[Thu Aug 23 17:35:10 2012] fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu Aug 23 17:35:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55.csv
[Thu Aug 23 17:35:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 17:35:13 2012] fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu Aug 23 17:35:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Aug 23 17:35:13 2012] fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu Aug 23 17:35:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Thu Aug 23 17:35:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412380101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 22:07:24 2012] Source 59 is offset by -0.254806 and -8.138657 pixels which is larger than
2 X fitted extent = 8.137426 x 8.137426, not incorporating fit results
[Sun Aug 26 22:07:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 22:07:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 22:07:24 2012] Assessing source extent using major
[Sun Aug 26 22:07:24 2012] Source does appear to be extended
[Sun Aug 26 22:07:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 22:07:24 2012] Source is confused with source 55