[Sat Mar  3 13:56:04 2012] Detection parameters:
  Position = (281.2, 325.9) = 23 23 23.60 58 53 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 660.3 +/- 42.7
  Background counts = 284.5
  Rate = 0.05 +/- 0.003

[Sat Mar  3 13:56:07 2012] Off-axis axis estimate = 2.35'
[Sat Mar  3 14:05:46 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 14:05:46 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Sat Mar  3 14:05:46 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Sat Mar  3 14:05:46 2012] Giving source the simple spatial ID 98 for pass 0, mean size = 7.60"
[Sun Mar  4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98.ximg exists
[Sun Mar  4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98.csv
[Sun Mar  4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98_1.ximg exists
[Sun Mar  4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98.csv
[Sun Mar  4 15:26:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 15:27:01 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Sun Mar  4 15:27:01 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Sun Mar  4 15:27:01 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src98 appears to have run properly
[Fri Mar  9 02:17:23 2012] Warning, spatial fit 98 centroid is now closest to src. 93
[Fri Mar  9 02:17:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:23 2012] Assessing source extent using major
[Fri Mar  9 02:17:23 2012] Source does appear to be extended
[Fri Mar  9 02:17:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:18:19 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 02:18:19 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Fri Mar  9 02:18:19 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Fri Mar  9 02:18:19 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 7.60"
[Sat Mar 10 15:32:49 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69.ximg exists
[Sat Mar 10 15:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69.csv
[Sat Mar 10 15:32:49 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69_1.ximg exists
[Sat Mar 10 15:32:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69.csv
[Sat Mar 10 15:32:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:32:52 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sat Mar 10 15:32:52 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sat Mar 10 15:32:52 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Thu Mar 15 15:52:42 2012] Source 99 is offset by 7.224184 and -6.906849 pixels which is larger than
2 X fitted extent = 2.723458 x 2.723458, not incorporating fit results
[Thu Mar 15 15:52:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:52:43 2012] Assessing source extent using major
[Thu Mar 15 15:52:43 2012] Source does appear to be extended
[Thu Mar 15 15:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:53:43 2012] XMMSAS src. selection expression = ellipse(24418.726013, 28305.248169, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 15:53:43 2012] Writing source region out to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99_src.reg
[Thu Mar 15 15:53:43 2012] Extracting stamp from image fullrun_pn_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (244, 288) - (319, 363)
[Thu Mar 15 15:53:43 2012] XMMSAS bgd. selection expression = annulus(24418.726013, 28305.248169, 1087.500000, 2175.000000, X, Y) && !ellipse(24653.758600, 24800.269200, 3443.184099, 3443.184099, 0.000000, X, Y) && !ellipse(24051.654000, 24650.854000, 7176.336206, 6367.248183, 6.494000, X, Y) && !ellipse(22216.517273, 23766.884460, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24165.413000, 23720.988000, 3734.448107, 3734.448107, 0.000000, X, Y) && !ellipse(21572.703400, 22739.780000, 4510.872130, 4510.872130, 0.000000, X, Y) && !ellipse(22326.089000, 24106.292000, 3821.592110, 3821.592110, 192.673000, X, Y) && !ellipse(26447.650000, 33585.786000, 3229.160093, 3229.160093, 0.000000, X, Y) && !ellipse(26342.744000, 33065.788000, 3157.280091, 3157.280091, 0.000000, X, Y) && !ellipse(26731.317200, 31672.326000, 1429.656041, 1429.656041, 0.000000, X, Y) && !ellipse(25242.944000, 31664.834000, 1434.400041, 1434.400041, 0.000000, X, Y) && !ellipse(25099.454285, 30493.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.267120, 31010.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.282000, 30824.298240, 1344.184039, 1344.184039, 0.000000, X, Y) && !ellipse(25981.598000, 30795.580200, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(26763.910736, 30055.438171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.398000, 30341.198000, 2553.704073, 2553.704073, 0.000000, X, Y) && !ellipse(26390.794159, 29443.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.101600, 29680.492000, 1255.368036, 1255.368036, 0.000000, X, Y) && !ellipse(24767.515600, 29613.100000, 1009.896029, 1009.896029, 0.000000, X, Y) && !ellipse(25739.809200, 29661.440000, 1280.800037, 1280.800037, 0.000000, X, Y) && !ellipse(25699.169600, 28806.272000, 1190.224034, 1190.224034, 0.000000, X, Y) && !ellipse(21399.048355, 27713.566925, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 15:53:43 2012] Writing fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99.gif
[Thu Mar 15 20:05:14 2012] Mean detx,y = (908.98, 3424.75) 
[Thu Mar 15 20:05:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 20:05:56 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 20:05:57 2012] Setting source spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Thu Mar 15 20:05:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Sat Mar 17 04:58:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 04:58:32 2012] rmf not generated due to insufficient counts
[Mon Mar 19 23:24:40 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:24:40 2012] Error reading totcts from fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Mon Mar 19 23:24:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:24:53 2012] Using photon index=1.80, rate=0.0501, arf fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src99.arf
[Mon Mar 19 23:24:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:24:53 2012] Updating source flux to 1.9e-13
[Mon Mar 19 23:35:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting