[Sat Mar 3 13:56:03 2012] Detection parameters: Position = (285.9, 361.0) = 23 23 20.99 58 55 59.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 142.9 +/- 25.3 Background counts = 214.3 Rate = 0.01 +/- 0.002 [Sat Mar 3 13:56:07 2012] Off-axis axis estimate = 4.62' [Sat Mar 3 14:05:46 2012] Using EEF radius (= 8.74 ")to estimate initial spatial extent for simple fitting [Sat Mar 3 14:05:46 2012] Initial guess for spatial extent in simple fitting = 8.74" [Sat Mar 3 14:05:46 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993 [Sat Mar 3 14:05:46 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 8.74" [Sun Mar 4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75.ximg exists [Sun Mar 4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75.csv [Sun Mar 4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75_1.ximg exists [Sun Mar 4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75.csv [Sun Mar 4 15:26:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 4 15:27:01 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists [Sun Mar 4 15:27:01 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists [Sun Mar 4 15:27:01 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly [Fri Mar 9 02:17:23 2012] Spatial fit model total counts = 3447.030000, observed total counts = 3456.000000 [Fri Mar 9 02:17:23 2012] Offset between fit and detection position for source 75 = 5.781321 pixels [Fri Mar 9 02:17:23 2012] Warning, changing simple spatial fit ID from 75 to 72 [Fri Mar 9 02:17:23 2012] 3472.895000 total counts/ 3195.420000 bgd. counts: snr = 4.908625 Spatial fit parameters: Offset between fit and detection position for source 75 = 5.781321 pixels Position = (290.8, 364.1) = 23 23 18.26 58 56 11.4 Extent = 15.2 (9.8-18.0)", rotation angle = 0 Source counts = 277.5 +/- 58.9 Background counts = 3195.4 Rate = 0.02 +/- 0.005 [Fri Mar 9 02:17:23 2012] Source 75 is offset by 0.167230 and 5.306357 pixels which is larger than 2 X fitted extent = 1.430368 x 1.430368, not incorporating fit results [Fri Mar 9 02:17:23 2012] Vigneting correction estimate = 1.000000 [Fri Mar 9 02:17:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Mar 9 02:17:23 2012] Assessing source extent using major axis lower bound [Fri Mar 9 02:17:23 2012] Source does appear to be extended [Fri Mar 9 02:17:23 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Mar 9 02:17:23 2012] Source is confused with source 72 [Fri Mar 9 02:18:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Mar 9 02:18:19 2012] Initial guess for spatial extent in simple fitting = 15.16" [Fri Mar 9 02:18:19 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.007 [Fri Mar 9 02:18:19 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 15.16" [Sat Mar 10 15:32:48 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src55.ximg exists [Sat Mar 10 15:32:48 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src55_1.ximg exists [Sat Mar 10 15:32:48 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src55 appears to have run properly [Sat Mar 10 15:32:51 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists [Sat Mar 10 15:32:51 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists [Sat Mar 10 15:32:51 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly [Thu Mar 15 15:52:42 2012] Spatial fit model total counts = 3455.320000, observed total counts = 3456.000000 [Thu Mar 15 15:52:42 2012] Offset between fit and detection position for source 75 = 0.423846 pixels [Thu Mar 15 15:52:42 2012] Warning, changing simple spatial fit ID from 55 to 53 [Thu Mar 15 15:52:42 2012] 3427.375000 total counts/ 3001.480000 bgd. counts: snr = 7.773826 Spatial fit parameters: Offset between fit and detection position for source 75 = 0.423846 pixels Position = (290.7, 364.5) = 23 23 18.29 58 56 13.3 Extent = 17.9 (17.8-18.0)", rotation angle = 0 Source counts = 425.9 +/- 58.5 Background counts = 3001.5 Rate = 0.04 +/- 0.005 [Thu Mar 15 15:52:43 2012] Vigneting correction estimate = 1.000000 [Thu Mar 15 15:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Mar 15 15:52:43 2012] Assessing source extent using major axis lower bound [Thu Mar 15 15:52:43 2012] Source does appear to be extended [Thu Mar 15 15:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Mar 15 15:53:42 2012] XMMSAS src. selection expression = ellipse(25242.944000, 31664.834000, 1075.800031, 1075.800031, 0.000000, X, Y) [Thu Mar 15 15:53:42 2012] Writing source region out to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75_src.reg [Thu Mar 15 15:53:42 2012] Extracting stamp from image fullrun_pn_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (229, 303) - (353, 426) [Thu Mar 15 15:53:42 2012] XMMSAS bgd. selection expression = annulus(25242.944000, 31664.834000, 1793.000052, 3586.000103, X, Y) && !ellipse(24653.758600, 24800.269200, 3443.184099, 3443.184099, 0.000000, X, Y) && !ellipse(24051.654000, 24650.854000, 7176.336206, 6367.248183, 6.494000, X, Y) && !ellipse(27592.677200, 36756.126000, 1730.112050, 1730.112050, 0.000000, X, Y) && !ellipse(26285.039800, 35997.568000, 1663.384048, 656.523219, 110.166000, X, Y) && !ellipse(27028.893200, 35451.498000, 1465.296042, 619.237618, 90.000000, X, Y) && !ellipse(25371.597443, 35006.196960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26814.231054, 34563.111255, 3229.168093, 781.391934, 115.029460, X, Y) && !ellipse(26073.013702, 34580.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27912.325073, 34318.934662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26762.642000, 34268.642000, 1614.584046, 1614.584046, 0.000000, X, Y) && !ellipse(27219.067719, 34149.841156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.650000, 33585.786000, 3229.160093, 3229.160093, 0.000000, X, Y) && !ellipse(26342.744000, 33065.788000, 3157.280091, 3157.280091, 0.000000, X, Y) && !ellipse(24848.238068, 33110.415771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.542877, 32929.780853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26545.738000, 32699.790000, 1500.752043, 1500.752043, 0.000000, X, Y) && !ellipse(25606.017944, 32051.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.317200, 31672.326000, 1429.656041, 1429.656041, 0.000000, X, Y) && !ellipse(25099.454285, 30493.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26065.205261, 31358.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.267120, 31010.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.282000, 30824.298240, 1344.184039, 1344.184039, 0.000000, X, Y) && !ellipse(25981.598000, 30795.580200, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(26763.910736, 30055.438171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.398000, 30341.198000, 2553.704073, 2553.704073, 0.000000, X, Y) && !ellipse(26390.794159, 29443.395508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24821.101600, 29680.492000, 1255.368036, 1255.368036, 0.000000, X, Y) && !ellipse(24767.515600, 29613.100000, 1009.896029, 1009.896029, 0.000000, X, Y) && !ellipse(25739.809200, 29661.440000, 1280.800037, 1280.800037, 0.000000, X, Y) && !ellipse(25699.169600, 28806.272000, 1190.224034, 1190.224034, 0.000000, X, Y) && !ellipse(24418.726013, 28305.248169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21399.048355, 27713.566925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27677.431976, 27420.831360, 870.000000, 870.000000, 0.000000, X, Y) [Thu Mar 15 15:53:42 2012] Writing fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75.gif [Thu Mar 15 19:41:46 2012] Mean detx,y = (792.31, 6876.25) [Thu Mar 15 19:41:49 2012] Setting backscal keywords in source and bgd. spectrum [Thu Mar 15 19:42:31 2012] Binned source spectrum to 10 counts/bin [Thu Mar 15 19:42:31 2012] Setting source spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Thu Mar 15 19:42:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75_bgd.pi.gz [Mon Mar 19 23:24:39 2012] Updating aperture counts using extracted products [Mon Mar 19 23:24:39 2012] Error reading totcts from fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Mon Mar 19 23:24:51 2012] Calculating source flux in energy range 0.30-8.00 [Mon Mar 19 23:24:51 2012] Using photon index=1.80, rate=0.037, arf fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src75.arf [Mon Mar 19 23:24:51 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Mar 19 23:24:51 2012] Updating source flux to 1.6e-13 [Mon Mar 19 23:35:27 2012] Flag b found in src. 75 procflags, skipping spectral fitting [Mon Mar 19 23:35:27 2012] Flag c found in src. 75 procflags, skipping spectral fitting