[Sat Mar  3 13:56:03 2012] Detection parameters:
  Position = (286.2, 381.1) = 23 23 20.85 58 57 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.7 +/- 24.1
  Background counts = 131.3
  Rate = 0.01 +/- 0.002

[Sat Mar  3 13:56:07 2012] Off-axis axis estimate = 6.06'
[Sat Mar  3 14:05:46 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 14:05:46 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Sat Mar  3 14:05:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.258
[Sat Mar  3 14:05:46 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 9.46"
[Sun Mar  4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69.ximg exists
[Sun Mar  4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69.csv
[Sun Mar  4 15:26:58 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Mar  4 15:26:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69.csv
[Sun Mar  4 15:26:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 15:27:00 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Mar  4 15:27:00 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Mar  4 15:27:00 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Fri Mar  9 02:17:23 2012] Warning, spatial fit 69 centroid is now closest to src. 74
[Fri Mar  9 02:17:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:23 2012] Assessing source extent using major
[Fri Mar  9 02:17:23 2012] Source does appear to be extended
[Fri Mar  9 02:17:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:17:23 2012] Source is confused with source 66
[Fri Mar  9 02:18:19 2012] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 02:18:19 2012] Initial guess for spatial extent in simple fitting = 9.46"
[Fri Mar  9 02:18:19 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.258
[Fri Mar  9 02:18:19 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 9.46"
[Sat Mar 10 15:32:48 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50.ximg exists
[Sat Mar 10 15:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50.csv
[Sat Mar 10 15:32:48 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat Mar 10 15:32:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50.csv
[Sat Mar 10 15:32:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:32:51 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat Mar 10 15:32:51 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Mar 10 15:32:51 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Thu Mar 15 15:52:42 2012] Warning: source 42 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 10.130886 pixels away
[Thu Mar 15 15:52:42 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 10.676723 pixels away
[Thu Mar 15 15:52:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:52:43 2012] Assessing source extent using major
[Thu Mar 15 15:52:43 2012] Source does appear to be extended
[Thu Mar 15 15:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:53:41 2012] XMMSAS src. selection expression = ellipse(24848.238068, 33110.415771, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 15:53:41 2012] Writing source region out to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69_src.reg
[Thu Mar 15 15:53:41 2012] Extracting stamp from image fullrun_pn_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (249, 344) - (324, 419)
[Thu Mar 15 15:53:42 2012] XMMSAS bgd. selection expression = annulus(24848.238068, 33110.415771, 1087.500000, 2175.000000, X, Y) && !ellipse(24051.654000, 24650.854000, 7176.336206, 6367.248183, 6.494000, X, Y) && !ellipse(27592.677200, 36756.126000, 1730.112050, 1730.112050, 0.000000, X, Y) && !ellipse(25639.882843, 36143.951355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.039800, 35997.568000, 1663.384048, 656.523219, 110.166000, X, Y) && !ellipse(27028.893200, 35451.498000, 1465.296042, 619.237618, 90.000000, X, Y) && !ellipse(25371.597443, 35006.196960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26814.231054, 34563.111255, 3229.168093, 781.391934, 115.029460, X, Y) && !ellipse(26073.013702, 34580.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26762.642000, 34268.642000, 1614.584046, 1614.584046, 0.000000, X, Y) && !ellipse(27219.067719, 34149.841156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26447.650000, 33585.786000, 3229.160093, 3229.160093, 0.000000, X, Y) && !ellipse(26342.744000, 33065.788000, 3157.280091, 3157.280091, 0.000000, X, Y) && !ellipse(25782.542877, 32929.780853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26545.738000, 32699.790000, 1500.752043, 1500.752043, 0.000000, X, Y) && !ellipse(25606.017944, 32051.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.317200, 31672.326000, 1429.656041, 1429.656041, 0.000000, X, Y) && !ellipse(25242.944000, 31664.834000, 1434.400041, 1434.400041, 0.000000, X, Y) && !ellipse(25099.454285, 30493.648102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26065.205261, 31358.104401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26919.267120, 31010.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25974.282000, 30824.298240, 1344.184039, 1344.184039, 0.000000, X, Y) && !ellipse(25981.598000, 30795.580200, 1391.592040, 1391.592040, 0.000000, X, Y) && !ellipse(26080.398000, 30341.198000, 2553.704073, 2553.704073, 0.000000, X, Y) && !ellipse(24821.101600, 29680.492000, 1255.368036, 1255.368036, 0.000000, X, Y) && !ellipse(25739.809200, 29661.440000, 1280.800037, 1280.800037, 0.000000, X, Y)
[Thu Mar 15 15:53:42 2012] Writing fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69.gif
[Thu Mar 15 19:36:41 2012] Mean detx,y = (1550.77, 8235.74) 
[Thu Mar 15 19:36:45 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 19:37:11 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 19:37:12 2012] Setting source spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Thu Mar 15 19:37:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Mar 17 04:27:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 04:27:41 2012] rmf not generated due to insufficient counts
[Mon Mar 19 23:24:38 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:24:38 2012] Error reading totcts from fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Mon Mar 19 23:24:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:24:51 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src69.arf
[Mon Mar 19 23:24:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:24:51 2012] Updating source flux to 7e-14
[Mon Mar 19 23:35:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting