[Sat Mar  3 13:56:01 2012] Detection parameters:
  Position = (319.1, 441.0) = 23 23 2.29 59 1 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 695.5 +/- 36.5
  Background counts = 80.4
  Rate = 0.05 +/- 0.003

[Sat Mar  3 13:56:07 2012] Off-axis axis estimate = 10.44'
[Sat Mar  3 14:05:46 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 14:05:46 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Sat Mar  3 14:05:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Sat Mar  3 14:05:46 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.65"
[Sun Mar  4 15:26:57 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src27.ximg exists
[Sun Mar  4 15:26:57 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Mar  4 15:26:57 2012] Fit fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_src27 appears to have run properly
[Sun Mar  4 15:26:59 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Mar  4 15:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Mar  4 15:26:59 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Mar  4 15:26:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun Mar  4 15:26:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 02:17:23 2012] Warning, spatial fit 27 centroid is now closest to src. 32
[Fri Mar  9 02:17:23 2012] Source 27 is offset by -2.186343 and 6.307620 pixels which is larger than
2 X fitted extent = 1.350818 x 1.350818, not incorporating fit results
[Fri Mar  9 02:17:23 2012] Source 27 is offset by -9.279286 and 1.825505 pixels which is larger than
2 X fitted extent = 2.194474 x 2.194474, not incorporating fit results
[Fri Mar  9 02:17:23 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:23 2012] Assessing source extent using major
[Fri Mar  9 02:17:23 2012] Source does appear to be extended
[Fri Mar  9 02:17:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:18:19 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 02:18:19 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Fri Mar  9 02:18:19 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891
[Fri Mar  9 02:18:19 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.65"
[Sat Mar 10 15:32:47 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25.ximg exists
[Sat Mar 10 15:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25.csv
[Sat Mar 10 15:32:47 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Mar 10 15:32:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25.csv
[Sat Mar 10 15:32:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 15:32:50 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Mar 10 15:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Mar 10 15:32:50 2012] fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Mar 10 15:32:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Sat Mar 10 15:32:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:52:42 2012] Spatial fit model total counts = 3424.710000, observed total counts = 2980.000000
[Thu Mar 15 15:52:42 2012] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 15:52:42 2012] Source 27 is offset by -9.282987 and 1.695137 pixels which is larger than
2 X fitted extent = 1.889338 x 1.889338, not incorporating fit results
[Thu Mar 15 15:52:43 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:52:43 2012] Assessing source extent using major
[Thu Mar 15 15:52:43 2012] Source does appear to be extended
[Thu Mar 15 15:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:52:43 2012] Source is confused with source 31
[Thu Mar 15 15:53:40 2012] XMMSAS src. selection expression = ellipse(27714.958160, 38318.592926, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 15:53:40 2012] Writing source region out to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27_src.reg
[Thu Mar 15 15:53:40 2012] Extracting stamp from image fullrun_pn_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (282, 404) - (357, 479)
[Thu Mar 15 15:53:40 2012] XMMSAS bgd. selection expression = annulus(27714.958160, 38318.592926, 1087.500000, 2175.000000, X, Y) && !ellipse(27592.677200, 36756.126000, 1730.112050, 1730.112050, 0.000000, X, Y) && !ellipse(26886.745000, 38349.704000, 1798.136052, 1798.136052, 0.000000, X, Y) && !ellipse(26126.122253, 38901.284241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.982452, 37884.851410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25785.967865, 37705.886505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28177.923584, 37189.793945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.319580, 36977.292000, 912.504026, 912.504026, 0.000000, X, Y) && !ellipse(25639.882843, 36143.951355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.039800, 35997.568000, 1663.384048, 656.523219, 110.166000, X, Y) && !ellipse(27028.893200, 35451.498000, 1465.296042, 619.237618, 90.000000, X, Y) && !ellipse(26814.231054, 34563.111255, 3229.168093, 781.391934, 115.029460, X, Y) && !ellipse(26447.650000, 33585.786000, 3229.160093, 3229.160093, 0.000000, X, Y) && !ellipse(26342.744000, 33065.788000, 3157.280091, 3157.280091, 0.000000, X, Y)
[Thu Mar 15 15:53:40 2012] Writing fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27.gif
[Thu Mar 15 18:54:12 2012] Mean detx,y = (-11.01, 13883.73) 
[Thu Mar 15 18:54:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 18:54:34 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 18:54:34 2012] Setting source spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu Mar 15 18:54:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Mar 17 03:50:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 03:50:45 2012] rmf not generated due to insufficient counts
[Mon Mar 19 23:24:35 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:24:35 2012] Error reading totcts from fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Mar 19 23:24:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:24:48 2012] Using photon index=1.80, rate=0.0528, arf fullrun_pn_xmm0412180101_pi300-10000_pass1_cl_src27.arf
[Mon Mar 19 23:24:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:24:48 2012] Updating source flux to 4.2e-13
[Mon Mar 19 23:35:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting