[Sat Mar  3 13:56:15 2012] Detection parameters:
  Position = (233.5, 277.0) = 23 23 50.33 58 49 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1703.6 +/- 85.7
  Background counts = 91.0
  Rate = 0.1 +/- 0.006

[Sat Mar  3 13:56:18 2012] Off-axis axis estimate = 4.96'
[Thu Mar  8 09:48:39 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:48:39 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Thu Mar  8 09:48:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.156
[Thu Mar  8 09:48:39 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.91"
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src19.ximg exists
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Mar  9 02:16:51 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src19 appears to have run properly
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Mar  9 02:16:53 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Mar  9 02:18:01 2012] Spatial fit model total counts = 7921.770000, observed total counts = 7914.000000
[Fri Mar  9 02:18:01 2012] Offset between fit and detection position for source 6 = 4.676781 pixels
[Fri Mar  9 02:18:01 2012] Warning, changing simple spatial fit ID from 19 to 18
[Fri Mar  9 02:18:01 2012] 7995.360000 total counts/ 4804.950000 bgd. counts: snr = 46.025876
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.676781 pixels
  Position = (237.1, 280.0) = 23 23 48.30 58 50 5.2
  Extent = 17.7 (17.6-35.3)", rotation angle = 0
  Source counts = 3190.4 +/- 89.4
  Background counts = 4804.9
  Rate = 0.4 +/- 0.01
[Fri Mar  9 02:18:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:18:01 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 02:18:01 2012] Source does appear to be extended
[Fri Mar  9 02:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:18:01 2012] Source is confused with source 20
[Wed Mar 14 11:45:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 11:45:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 11:45:00 2012] Initial guess for spatial extent in simple fitting = 17.66"
[Wed Mar 14 11:45:00 2012] source mask rpix=4.1, npix_max = 83, mask sum = 90, frac = 1.082
[Wed Mar 14 11:45:00 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 17.66"
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19.csv
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19.csv
[Thu Mar 15 15:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Mar 15 15:52:05 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Mar 15 15:53:12 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.687721 pixels away
[Thu Mar 15 15:53:12 2012] Warning, spatial fit 19 centroid is now closest to src. 4
[Thu Mar 15 15:53:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:53:12 2012] Source does appear to be extended
[Thu Mar 15 15:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 08:10:06 2012] Counts = 3190.410000, rescaling region sizes by 2.000000
[Sat Mar 17 08:10:06 2012] XMMSAS src. selection expression = ellipse(20583.014000, 24309.280000, 2119.620061, 2119.620061, 0.000000, X, Y)
[Sat Mar 17 08:10:06 2012] Writing source region out to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6_src.reg
[Sat Mar 17 08:10:06 2012] Extracting stamp from image fullrun_mos2_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (115, 158) - (359, 402)
[Sat Mar 17 08:10:06 2012] XMMSAS bgd. selection expression = annulus(20583.014000, 24309.280000, 7065.400203, 14130.800407, X, Y) && !ellipse(24471.458400, 24628.588000, 3813.504110, 3813.504110, 75.389100, X, Y) && !ellipse(22577.535480, 21585.441000, 4205.088121, 4205.088121, 0.000000, X, Y) && !ellipse(22588.478200, 24283.565200, 4907.352141, 4907.352141, 0.000000, X, Y) && !ellipse(22638.343018, 21378.380280, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23855.681400, 24792.850000, 7236.288208, 7236.288208, 0.000000, X, Y) && !ellipse(22202.920000, 21855.042000, 2922.576084, 2922.576084, 0.000000, X, Y) && !ellipse(25106.285400, 25056.738000, 5290.992152, 5290.992152, 0.000000, X, Y) && !ellipse(26115.667000, 22049.182400, 3843.840111, 3843.840111, 0.000000, X, Y) && !ellipse(24923.252000, 24352.110000, 7146.960206, 7146.960206, 0.000000, X, Y) && !ellipse(26338.143600, 22528.177800, 4816.992139, 4816.992139, 0.000000, X, Y) && !ellipse(23654.258200, 21735.967600, 7594.992219, 7594.992219, 0.000000, X, Y) && !ellipse(23814.992000, 21514.508000, 8128.176234, 8128.176234, 0.000000, X, Y) && !ellipse(24821.806000, 20971.841400, 2485.040072, 561.676016, 346.332300, X, Y) && !ellipse(26089.901400, 23413.162000, 3843.840111, 3843.840111, 357.636000, X, Y) && !ellipse(26641.154000, 22455.234000, 7687.680221, 7687.680221, 0.000000, X, Y) && !ellipse(24379.583600, 20835.947400, 1242.520036, 1242.520036, 0.000000, X, Y) && !ellipse(25618.278000, 20424.644000, 1320.000038, 1320.000038, 0.000000, X, Y) && !ellipse(19756.288000, 25092.514000, 1413.080041, 1413.080041, 0.000000, X, Y) && !ellipse(21741.716000, 20300.726000, 1385.616040, 1385.616040, 0.000000, X, Y)
[Sat Mar 17 08:10:06 2012] Writing fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6.gif
[Sat Mar 17 09:43:47 2012] Mean detx,y = (-2463.71, 1523.62) 
[Sat Mar 17 09:43:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 09:48:03 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 09:48:04 2012] Setting source spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Mar 17 09:48:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Mar 19 23:25:05 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:05 2012] Error reading totcts from fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Mar 19 23:25:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:25:07 2012] Using photon index=1.80, rate=0.447, arf fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src6.arf
[Mon Mar 19 23:25:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:25:08 2012] Updating source flux to 5.2e-12
[Mon Mar 19 23:25:12 2012] Flag c found in src. 6 procflags, skipping spectral fitting