[Sat Mar  3 13:56:15 2012] Detection parameters:
  Position = (261.0, 279.9) = 23 23 34.95 58 50 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28449.3 +/- 205.3
  Background counts = 224.0
  Rate = 2 +/- 0.01

[Sat Mar  3 13:56:18 2012] Off-axis axis estimate = 3.03'
[Thu Mar  8 09:48:39 2012] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:48:39 2012] Initial guess for spatial extent in simple fitting = 7.94"
[Thu Mar  8 09:48:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.739
[Thu Mar  8 09:48:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.94"
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Mar  9 02:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3.csv
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Mar  9 02:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3.csv
[Fri Mar  9 02:16:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Mar  9 02:16:53 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Mar  9 02:18:01 2012] Spatial fit model total counts = 75653.100000, observed total counts = 80029.000000
[Fri Mar  9 02:18:01 2012] Offset between fit and detection position for source 2 = 2.688362 pixels
[Fri Mar  9 02:18:01 2012] 76505.200000 total counts/ 25600.000000 bgd. counts: snr = 318.157500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.688362 pixels
  Position = (258.7, 278.4) = 23 23 36.20 58 49 58.4
  Extent = 15.9 (15.9-31.8)", rotation angle = 0
  Source counts = 50905.2 +/- 276.6
  Background counts = 25600.0
  Rate = 7 +/- 0.04
[Fri Mar  9 02:18:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:18:01 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 02:18:01 2012] Source does appear to be extended
[Fri Mar  9 02:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 11:45:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 11:45:00 2012] Initial guess for spatial extent in simple fitting = 15.89"
[Wed Mar 14 11:45:00 2012] source mask rpix=3.7, npix_max = 68, mask sum = 72, frac = 1.044
[Wed Mar 14 11:45:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 15.89"
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 15:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 15 15:52:05 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 15 15:53:12 2012] Spatial fit model total counts = 124926.000000, observed total counts = 121495.000000
[Thu Mar 15 15:53:12 2012] Offset between fit and detection position for source 2 = 1.966323 pixels
[Thu Mar 15 15:53:12 2012] 110475.900000 total counts/ 48396.700000 bgd. counts: snr = 282.187802
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.966323 pixels
  Position = (260.2, 279.7) = 23 23 35.38 58 50 4.1
  Extent = 20.4 (20.4-20.4)", rotation angle = 0
  Source counts = 62079.2 +/- 332.4
  Background counts = 48396.7
  Rate = 9 +/- 0.05
[Thu Mar 15 15:53:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:53:12 2012] Source does appear to be extended
[Thu Mar 15 15:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:53:12 2012] Source is confused with source 18
[Sat Mar 17 08:10:05 2012] Counts = 62079.200000, rescaling region sizes by 3.000000
[Sat Mar 17 08:10:05 2012] XMMSAS src. selection expression = ellipse(22588.478200, 24283.565200, 3680.514106, 3680.514106, 0.000000, X, Y)
[Sat Mar 17 08:10:05 2012] Writing source region out to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 17 08:10:05 2012] Extracting stamp from image fullrun_mos2_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (49, 68) - (472, 491)
[Sat Mar 17 08:10:05 2012] XMMSAS bgd. selection expression = annulus(22588.478200, 24283.565200, 18402.570530, 36805.141059, X, Y) && !ellipse(24471.458400, 24628.588000, 3813.504110, 3813.504110, 75.389100, X, Y) && !ellipse(22577.535480, 21585.441000, 4205.088121, 4205.088121, 0.000000, X, Y) && !ellipse(22638.343018, 21378.380280, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23855.681400, 24792.850000, 7236.288208, 7236.288208, 0.000000, X, Y) && !ellipse(22202.920000, 21855.042000, 2922.576084, 2922.576084, 0.000000, X, Y) && !ellipse(25106.285400, 25056.738000, 5290.992152, 5290.992152, 0.000000, X, Y) && !ellipse(26115.667000, 22049.182400, 3843.840111, 3843.840111, 0.000000, X, Y) && !ellipse(24923.252000, 24352.110000, 7146.960206, 7146.960206, 0.000000, X, Y) && !ellipse(26338.143600, 22528.177800, 4816.992139, 4816.992139, 0.000000, X, Y) && !ellipse(23654.258200, 21735.967600, 7594.992219, 7594.992219, 0.000000, X, Y) && !ellipse(23814.992000, 21514.508000, 8128.176234, 8128.176234, 0.000000, X, Y) && !ellipse(24821.806000, 20971.841400, 2485.040072, 561.676016, 346.332300, X, Y) && !ellipse(26089.901400, 23413.162000, 3843.840111, 3843.840111, 357.636000, X, Y) && !ellipse(26641.154000, 22455.234000, 7687.680221, 7687.680221, 0.000000, X, Y) && !ellipse(24379.583600, 20835.947400, 1242.520036, 1242.520036, 0.000000, X, Y) && !ellipse(25618.278000, 20424.644000, 1320.000038, 1320.000038, 0.000000, X, Y) && !ellipse(19756.288000, 25092.514000, 1413.080041, 1413.080041, 0.000000, X, Y) && !ellipse(20583.014000, 24309.280000, 1413.080041, 1413.080041, 0.000000, X, Y) && !ellipse(21741.716000, 20300.726000, 1385.616040, 1385.616040, 0.000000, X, Y)
[Sat Mar 17 08:10:05 2012] Writing fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2.gif
[Sat Mar 17 08:28:30 2012] Mean detx,y = (-655.03, 1306.09) 
[Sat Mar 17 08:28:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 08:33:40 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 08:33:40 2012] Setting source spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 17 08:33:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar 19 23:25:03 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:03 2012] Error reading totcts from fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar 19 23:25:06 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:25:06 2012] Using photon index=1.80, rate=8.7, arf fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src2.arf
[Mon Mar 19 23:25:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:25:06 2012] Updating source flux to 9.1e-11
[Mon Mar 19 23:25:12 2012] Flag c found in src. 2 procflags, skipping spectral fitting