[Sat Mar  3 13:56:16 2012] Detection parameters:
  Position = (289.9, 229.1) = 23 23 18.72 58 46 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2037.5 +/- 60.0
  Background counts = 90.7
  Rate = 0.1 +/- 0.004

[Sat Mar  3 13:56:18 2012] Off-axis axis estimate = 5.06'
[Thu Mar  8 09:48:39 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:48:39 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Thu Mar  8 09:48:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Thu Mar  8 09:48:39 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.96"
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17.ximg exists
[Fri Mar  9 02:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17.csv
[Fri Mar  9 02:16:51 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Mar  9 02:16:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17.csv
[Fri Mar  9 02:16:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Mar  9 02:16:53 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Mar  9 02:16:53 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Mar  9 02:18:01 2012] Warning, spatial fit 17 centroid is now closest to src. 69
[Fri Mar  9 02:18:01 2012] Spatial fit model total counts = 2543.280000, observed total counts = 2538.000000
[Fri Mar  9 02:18:01 2012] Offset between fit and detection position for source 17 = 8.026875 pixels
[Fri Mar  9 02:18:01 2012] Warning, changing simple spatial fit ID from 17 to 34
[Fri Mar  9 02:18:01 2012] 2561.783000 total counts/ 1934.220000 bgd. counts: snr = 14.269357
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 8.026875 pixels
  Position = (295.0, 235.3) = 23 23 15.86 58 46 51.3
  Extent = 16.5 (13.7-18.1)", rotation angle = 0
  Source counts = 627.6 +/- 50.6
  Background counts = 1934.2
  Rate = 0.09 +/- 0.007
[Fri Mar  9 02:18:01 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:18:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:18:01 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 02:18:01 2012] Source does appear to be extended
[Fri Mar  9 02:18:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:18:01 2012] Source is confused with source 15
[Wed Mar 14 11:45:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 11:45:00 2012] Initial guess for spatial extent in simple fitting = 16.50"
[Wed Mar 14 11:45:00 2012] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.977
[Wed Mar 14 11:45:00 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 16.50"
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17.csv
[Thu Mar 15 15:52:04 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17_1.ximg exists
[Thu Mar 15 15:52:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17.csv
[Thu Mar 15 15:52:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Thu Mar 15 15:52:05 2012] fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Thu Mar 15 15:52:05 2012] Fit fullrun_mos2_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Thu Mar 15 15:53:12 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 18.027632 pixels away
[Thu Mar 15 15:53:12 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 19.704406 pixels away
[Thu Mar 15 15:53:12 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:12 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:53:12 2012] Source does appear to be extended
[Thu Mar 15 15:53:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 08:10:06 2012] XMMSAS src. selection expression = ellipse(25618.278000, 20424.644000, 990.000028, 990.000028, 0.000000, X, Y)
[Sat Mar 17 08:10:06 2012] Writing source region out to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17_src.reg
[Sat Mar 17 08:10:06 2012] Extracting stamp from image fullrun_mos2_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (238, 178) - (352, 292)
[Sat Mar 17 08:10:06 2012] XMMSAS bgd. selection expression = annulus(25618.278000, 20424.644000, 1650.000047, 3300.000095, X, Y) && !ellipse(24471.458400, 24628.588000, 3813.504110, 3813.504110, 75.389100, X, Y) && !ellipse(22577.535480, 21585.441000, 4205.088121, 4205.088121, 0.000000, X, Y) && !ellipse(22588.478200, 24283.565200, 4907.352141, 4907.352141, 0.000000, X, Y) && !ellipse(22638.343018, 21378.380280, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23855.681400, 24792.850000, 7236.288208, 7236.288208, 0.000000, X, Y) && !ellipse(22202.920000, 21855.042000, 2922.576084, 2922.576084, 0.000000, X, Y) && !ellipse(25106.285400, 25056.738000, 5290.992152, 5290.992152, 0.000000, X, Y) && !ellipse(26115.667000, 22049.182400, 3843.840111, 3843.840111, 0.000000, X, Y) && !ellipse(24923.252000, 24352.110000, 7146.960206, 7146.960206, 0.000000, X, Y) && !ellipse(26338.143600, 22528.177800, 4816.992139, 4816.992139, 0.000000, X, Y) && !ellipse(23654.258200, 21735.967600, 7594.992219, 7594.992219, 0.000000, X, Y) && !ellipse(23814.992000, 21514.508000, 8128.176234, 8128.176234, 0.000000, X, Y) && !ellipse(24821.806000, 20971.841400, 2485.040072, 561.676016, 346.332300, X, Y) && !ellipse(26089.901400, 23413.162000, 3843.840111, 3843.840111, 357.636000, X, Y) && !ellipse(26641.154000, 22455.234000, 7687.680221, 7687.680221, 0.000000, X, Y) && !ellipse(24379.583600, 20835.947400, 1242.520036, 1242.520036, 0.000000, X, Y) && !ellipse(21741.716000, 20300.726000, 1385.616040, 1385.616040, 0.000000, X, Y)
[Sat Mar 17 08:10:06 2012] Writing fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17.gif
[Sat Mar 17 09:40:02 2012] Mean detx,y = (1928.18, 3478.76) 
[Sat Mar 17 09:40:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 09:40:27 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 09:40:27 2012] Setting source spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Mar 17 09:40:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Mon Mar 19 23:25:05 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:05 2012] Error reading totcts from fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Mon Mar 19 23:25:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 23:25:07 2012] Using photon index=1.80, rate=0.0879, arf fullrun_mos2_xmm0412180101_pi300-10000_pass1_cl_src17.arf
[Mon Mar 19 23:25:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 23:25:07 2012] Updating source flux to 1.3e-12
[Mon Mar 19 23:25:12 2012] Flag c found in src. 17 procflags, skipping spectral fitting