[Sat Mar  3 13:56:09 2012] Detection parameters:
  Position = (228.0, 236.9) = 23 23 53.38 58 46 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.7 +/- 28.9
  Background counts = 153.7
  Rate = 0.007 +/- 0.0007

[Sat Mar  3 13:56:15 2012] Off-axis axis estimate = 6.78'
[Sun Mar  4 15:27:01 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:27:01 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Sun Mar  4 15:27:01 2012] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.151
[Sun Mar  4 15:27:01 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.82"
[Thu Mar  8 09:48:34 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Mar  8 09:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31.csv
[Thu Mar  8 09:48:34 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Mar  8 09:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31.csv
[Thu Mar  8 09:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:48:37 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Mar  8 09:48:37 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Mar  8 09:48:37 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Mar  9 02:17:45 2012] Warning, spatial fit 31 centroid is now closest to src. 61
[Fri Mar  9 02:17:45 2012] Source 33 is offset by -3.334257 and -2.387967 pixels which is larger than
2 X fitted extent = 1.192501 x 1.192501, not incorporating fit results
[Fri Mar  9 02:17:45 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 11.345939 pixels away
[Fri Mar  9 02:17:45 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:45 2012] Assessing source extent using major
[Fri Mar  9 02:17:45 2012] Source does appear to be extended
[Fri Mar  9 02:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:17:45 2012] Source is confused with source 60
[Fri Mar  9 02:17:45 2012] Source is confused with source 61
[Sat Mar 10 15:32:54 2012] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 15:32:54 2012] Initial guess for spatial extent in simple fitting = 9.82"
[Sat Mar 10 15:32:54 2012] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.151
[Sat Mar 10 15:32:54 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 9.82"
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30.ximg exists
[Wed Mar 14 11:44:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30.csv
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Mar 14 11:44:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30.csv
[Wed Mar 14 11:44:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 11:44:59 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Mar 14 11:44:59 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Mar 14 11:44:59 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu Mar 15 15:53:02 2012] Warning, spatial fit 30 centroid is now closest to src. 18
[Thu Mar 15 15:53:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:02 2012] Assessing source extent using major
[Thu Mar 15 15:53:02 2012] Source does appear to be extended
[Thu Mar 15 15:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 05:25:20 2012] XMMSAS src. selection expression = ellipse(19784.531677, 20562.854843, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 17 05:25:20 2012] Writing source region out to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33_src.reg
[Sat Mar 17 05:25:20 2012] Extracting stamp from image fullrun_mos1_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (190, 199) - (265, 274)
[Sat Mar 17 05:25:20 2012] XMMSAS bgd. selection expression = annulus(19784.531677, 20562.854843, 1087.500000, 2175.000000, X, Y) && !ellipse(24678.437200, 24744.105400, 3441.504099, 3441.504099, 0.000000, X, Y) && !ellipse(22239.962000, 22005.374400, 4171.440120, 4171.440120, 0.000000, X, Y) && !ellipse(23792.002000, 24753.148000, 4788.624138, 4788.624138, 0.000000, X, Y) && !ellipse(22848.613000, 24409.376580, 3813.504110, 3813.504110, 0.000000, X, Y) && !ellipse(22554.124000, 21747.501200, 7997.856230, 7997.856230, 0.000000, X, Y) && !ellipse(21859.860000, 22521.852000, 8342.880240, 8342.880240, 0.000000, X, Y) && !ellipse(24934.554000, 24537.328000, 6883.008198, 6883.008198, 0.000000, X, Y) && !ellipse(26276.082000, 22341.754000, 7449.024214, 6472.176186, 110.475600, X, Y) && !ellipse(23605.642000, 21619.658000, 3998.928115, 3998.928115, 0.000000, X, Y) && !ellipse(24183.672000, 24718.326000, 7627.008219, 7627.008219, 0.000000, X, Y) && !ellipse(25616.996000, 21401.336000, 8040.336231, 8040.336231, 0.000000, X, Y) && !ellipse(23843.262000, 22404.544000, 3822.216110, 3822.216110, 0.000000, X, Y) && !ellipse(24156.329468, 20753.463379, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21058.162000, 23484.530000, 4183.296120, 4183.296120, 0.000000, X, Y) && !ellipse(23155.739800, 21261.396000, 4266.384123, 4266.384123, 0.000000, X, Y) && !ellipse(21358.002000, 21193.948000, 3160.896091, 3160.896091, 0.000000, X, Y) && !ellipse(20679.088043, 20403.821243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.743896, 19364.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20252.878845, 19877.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19241.574000, 20014.624000, 1571.160045, 1571.160045, 0.000000, X, Y) && !ellipse(19159.664000, 22563.555760, 1575.856045, 1575.856045, 0.000000, X, Y) && !ellipse(17892.700000, 22668.956000, 1569.072045, 543.971216, 21.189000, X, Y) && !ellipse(22264.384000, 18743.384000, 1515.696044, 1515.696044, 0.000000, X, Y) && !ellipse(18385.478000, 20514.689000, 1621.480047, 1621.480047, 0.000000, X, Y)
[Sat Mar 17 05:25:20 2012] Writing fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33.gif
[Sat Mar 17 07:55:43 2012] Mean detx,y = (5172.67, 3311.97) 
[Sat Mar 17 07:55:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 07:56:07 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 07:56:08 2012] Setting source spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat Mar 17 07:56:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat Mar 17 08:09:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 08:09:55 2012] rmf not generated due to insufficient counts
[Mon Mar 19 23:25:01 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:01 2012] Error reading totcts from fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Mar 19 23:25:03 2012] No arf file for this source, not re-computing flux
[Mon Mar 19 23:25:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Mar 19 23:25:12 2012] xmm0412180101/analysis//spectral/fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete