[Sat Mar  3 13:56:09 2012] Detection parameters:
  Position = (289.2, 216.0) = 23 23 19.11 58 45 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.6 +/- 27.1
  Background counts = 103.1
  Rate = 0.006 +/- 0.0006

[Sat Mar  3 13:56:15 2012] Off-axis axis estimate = 6.01'
[Sun Mar  4 15:27:01 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:27:01 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sun Mar  4 15:27:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.018
[Sun Mar  4 15:27:01 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 9.43"
[Thu Mar  8 09:48:34 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34.ximg exists
[Thu Mar  8 09:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34.csv
[Thu Mar  8 09:48:34 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu Mar  8 09:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34.csv
[Thu Mar  8 09:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:48:37 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu Mar  8 09:48:37 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu Mar  8 09:48:37 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Fri Mar  9 02:17:45 2012] Warning, spatial fit 34 centroid is now closest to src. 73
[Fri Mar  9 02:17:45 2012] Source 29 is offset by -3.899548 and -2.858600 pixels which is larger than
2 X fitted extent = 1.111099 x 1.111099, not incorporating fit results
[Fri Mar  9 02:17:45 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:45 2012] Assessing source extent using major
[Fri Mar  9 02:17:45 2012] Source does appear to be extended
[Fri Mar  9 02:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:17:45 2012] Source is confused with source 20
[Fri Mar  9 02:17:45 2012] Source is confused with source 73
[Sat Mar 10 15:32:54 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 15:32:54 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sat Mar 10 15:32:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.018
[Sat Mar 10 15:32:54 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.43"
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src33.ximg exists
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src33_1.ximg exists
[Wed Mar 14 11:44:58 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src33 appears to have run properly
[Wed Mar 14 11:44:59 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Wed Mar 14 11:44:59 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Wed Mar 14 11:44:59 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu Mar 15 15:53:02 2012] Spatial fit model total counts = 128355.000000, observed total counts = 101621.000000
[Thu Mar 15 15:53:02 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Mar 15 15:53:02 2012] Warning, spatial fit 33 centroid is now closest to src. 20
[Thu Mar 15 15:53:02 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.618034 pixels away
[Thu Mar 15 15:53:02 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.022718 pixels away
[Thu Mar 15 15:53:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:02 2012] Assessing source extent using major
[Thu Mar 15 15:53:02 2012] Source does appear to be extended
[Thu Mar 15 15:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 05:25:20 2012] XMMSAS src. selection expression = ellipse(25112.915283, 18746.125824, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 17 05:25:20 2012] Writing source region out to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29_src.reg
[Sat Mar 17 05:25:20 2012] Extracting stamp from image fullrun_mos1_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (252, 179) - (327, 254)
[Sat Mar 17 05:25:20 2012] XMMSAS bgd. selection expression = annulus(25112.915283, 18746.125824, 1087.500000, 2175.000000, X, Y) && !ellipse(22239.962000, 22005.374400, 4171.440120, 4171.440120, 0.000000, X, Y) && !ellipse(23792.002000, 24753.148000, 4788.624138, 4788.624138, 0.000000, X, Y) && !ellipse(22848.613000, 24409.376580, 3813.504110, 3813.504110, 0.000000, X, Y) && !ellipse(22554.124000, 21747.501200, 7997.856230, 7997.856230, 0.000000, X, Y) && !ellipse(21859.860000, 22521.852000, 8342.880240, 8342.880240, 0.000000, X, Y) && !ellipse(24934.554000, 24537.328000, 6883.008198, 6883.008198, 0.000000, X, Y) && !ellipse(26276.082000, 22341.754000, 7449.024214, 6472.176186, 110.475600, X, Y) && !ellipse(25557.169600, 24259.328000, 3399.408098, 3399.408098, 0.000000, X, Y) && !ellipse(26351.583000, 22648.503400, 3724.512107, 3724.512107, 0.000000, X, Y) && !ellipse(23605.642000, 21619.658000, 3998.928115, 3998.928115, 0.000000, X, Y) && !ellipse(24183.672000, 24718.326000, 7627.008219, 7627.008219, 0.000000, X, Y) && !ellipse(25616.996000, 21401.336000, 8040.336231, 8040.336231, 0.000000, X, Y) && !ellipse(23843.262000, 22404.544000, 3822.216110, 3822.216110, 0.000000, X, Y) && !ellipse(24156.329468, 20753.463379, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21058.162000, 23484.530000, 4183.296120, 4183.296120, 0.000000, X, Y) && !ellipse(23155.739800, 21261.396000, 4266.384123, 4266.384123, 0.000000, X, Y) && !ellipse(25108.636000, 19826.562000, 741.144021, 449.295213, 2.865000, X, Y) && !ellipse(21358.002000, 21193.948000, 3160.896091, 3160.896091, 0.000000, X, Y) && !ellipse(22871.961700, 19272.612823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.743896, 19364.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.043152, 19876.969177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.082000, 18340.476000, 1508.104043, 1508.104043, 0.000000, X, Y) && !ellipse(25901.262512, 19090.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.384000, 18743.384000, 1515.696044, 1515.696044, 0.000000, X, Y) && !ellipse(25456.582000, 18203.546000, 1509.512043, 1509.512043, 0.000000, X, Y) && !ellipse(26039.466000, 18047.404000, 1524.024044, 1524.024044, 0.000000, X, Y)
[Sat Mar 17 05:25:20 2012] Writing fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29.gif
[Sat Mar 17 07:58:04 2012] Mean detx,y = (5679.64, -2217.64) 
[Sat Mar 17 07:58:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 07:58:21 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 07:58:22 2012] Setting source spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Mar 17 07:58:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Mar 17 08:09:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 17 08:09:56 2012] rmf not generated due to insufficient counts
[Mon Mar 19 23:25:01 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:01 2012] Error reading totcts from fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Mar 19 23:25:03 2012] No arf file for this source, not re-computing flux
[Mon Mar 19 23:25:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Mar 19 23:25:12 2012] xmm0412180101/analysis//spectral/fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete