[Sat Mar  3 13:56:13 2012] Detection parameters:
  Position = (301.9, 209.2) = 23 23 12.01 58 44 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.1 +/- 19.5
  Background counts = 93.0
  Rate = 0.003 +/- 0.0005

[Sat Mar  3 13:56:15 2012] Off-axis axis estimate = 6.48'
[Sun Mar  4 15:27:03 2012] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 15:27:03 2012] Initial guess for spatial extent in simple fitting = 9.67"
[Sun Mar  4 15:27:03 2012] source mask rpix=2.2, npix_max = 29, mask sum = 34, frac = 1.147
[Sun Mar  4 15:27:03 2012] Giving source the simple spatial ID 99 for pass 0, mean size = 9.67"
[Thu Mar  8 09:48:36 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99.ximg exists
[Thu Mar  8 09:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99.csv
[Thu Mar  8 09:48:36 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99_1.ximg exists
[Thu Mar  8 09:48:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99.csv
[Thu Mar  8 09:48:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 09:48:39 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src99.ximg exists
[Thu Mar  8 09:48:39 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists
[Thu Mar  8 09:48:39 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly
[Fri Mar  9 02:17:45 2012] Spatial fit model total counts = 2592.300000, observed total counts = 2487.000000
[Fri Mar  9 02:17:45 2012] Offset between fit and detection position for source 101 = 2.365580 pixels
[Fri Mar  9 02:17:45 2012] Warning, changing simple spatial fit ID from 99 to 83
[Fri Mar  9 02:17:45 2012] 2501.520000 total counts/ 1876.690000 bgd. counts: snr = 14.423332
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 2.365580 pixels
  Position = (299.9, 208.0) = 23 23 13.15 58 44 52.4
  Extent = 19.1 (19.0-38.1)", rotation angle = 0
  Source counts = 624.8 +/- 50.0
  Background counts = 1876.7
  Rate = 0.04 +/- 0.003
[Fri Mar  9 02:17:45 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 02:17:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 02:17:45 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 02:17:45 2012] Source does appear to be extended
[Fri Mar  9 02:17:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 02:17:45 2012] Source is confused with source 34
[Sat Mar 10 15:32:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 15:32:54 2012] Initial guess for spatial extent in simple fitting = 19.05"
[Sat Mar 10 15:32:54 2012] source mask rpix=4.4, npix_max = 95, mask sum = 75, frac = 0.788
[Sat Mar 10 15:32:54 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 19.05"
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53.ximg exists
[Wed Mar 14 11:44:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53.csv
[Wed Mar 14 11:44:58 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53_1.ximg exists
[Wed Mar 14 11:44:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53.csv
[Wed Mar 14 11:44:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 11:45:00 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Wed Mar 14 11:45:00 2012] fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Wed Mar 14 11:45:00 2012] Fit fullrun_mos1_xmm0412180101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Thu Mar 15 15:53:02 2012] Warning, spatial fit 53 centroid is now closest to src. 29
[Thu Mar 15 15:53:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:53:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:53:02 2012] Assessing source extent using major axis lower bound
[Thu Mar 15 15:53:02 2012] Source does appear to be extended
[Thu Mar 15 15:53:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 05:25:21 2012] XMMSAS src. selection expression = ellipse(26039.466000, 18047.404000, 1143.018033, 1143.018033, 0.000000, X, Y)
[Sat Mar 17 05:25:21 2012] Writing source region out to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101_src.reg
[Sat Mar 17 05:25:21 2012] Extracting stamp from image fullrun_mos1_xmm0412180101_pi300-10000_cl_sm2.00.img.gz, (234, 142) - (366, 274)
[Sat Mar 17 05:25:21 2012] XMMSAS bgd. selection expression = annulus(26039.466000, 18047.404000, 1905.030055, 3810.060110, X, Y) && !ellipse(24678.437200, 24744.105400, 3441.504099, 3441.504099, 0.000000, X, Y) && !ellipse(22239.962000, 22005.374400, 4171.440120, 4171.440120, 0.000000, X, Y) && !ellipse(23792.002000, 24753.148000, 4788.624138, 4788.624138, 0.000000, X, Y) && !ellipse(22848.613000, 24409.376580, 3813.504110, 3813.504110, 0.000000, X, Y) && !ellipse(22554.124000, 21747.501200, 7997.856230, 7997.856230, 0.000000, X, Y) && !ellipse(21859.860000, 22521.852000, 8342.880240, 8342.880240, 0.000000, X, Y) && !ellipse(24934.554000, 24537.328000, 6883.008198, 6883.008198, 0.000000, X, Y) && !ellipse(26276.082000, 22341.754000, 7449.024214, 6472.176186, 110.475600, X, Y) && !ellipse(25557.169600, 24259.328000, 3399.408098, 3399.408098, 0.000000, X, Y) && !ellipse(26351.583000, 22648.503400, 3724.512107, 3724.512107, 0.000000, X, Y) && !ellipse(23605.642000, 21619.658000, 3998.928115, 3998.928115, 0.000000, X, Y) && !ellipse(24183.672000, 24718.326000, 7627.008219, 7627.008219, 0.000000, X, Y) && !ellipse(25616.996000, 21401.336000, 8040.336231, 8040.336231, 0.000000, X, Y) && !ellipse(23843.262000, 22404.544000, 3822.216110, 3822.216110, 0.000000, X, Y) && !ellipse(24156.329468, 20753.463379, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(21058.162000, 23484.530000, 4183.296120, 4183.296120, 0.000000, X, Y) && !ellipse(23155.739800, 21261.396000, 4266.384123, 4266.384123, 0.000000, X, Y) && !ellipse(25108.636000, 19826.562000, 741.144021, 449.295213, 2.865000, X, Y) && !ellipse(21358.002000, 21193.948000, 3160.896091, 3160.896091, 0.000000, X, Y) && !ellipse(22871.961700, 19272.612823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22130.743896, 19364.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28394.672211, 20751.908859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27266.043152, 19876.969177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.082000, 18340.476000, 1508.104043, 1508.104043, 0.000000, X, Y) && !ellipse(29200.800171, 22581.990021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.012817, 21610.198853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25901.262512, 19090.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25112.915283, 18746.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29023.728302, 20651.335022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22264.384000, 18743.384000, 1515.696044, 1515.696044, 0.000000, X, Y) && !ellipse(25456.582000, 18203.546000, 1509.512043, 1509.512043, 0.000000, X, Y)
[Sat Mar 17 05:25:21 2012] Writing fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101.gif
[Sat Mar 17 08:07:48 2012] Mean detx,y = (6055.72, -3244.44) 
[Sat Mar 17 08:07:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 17 08:08:14 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 17 08:08:14 2012] Setting source spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Sat Mar 17 08:08:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Mon Mar 19 23:25:03 2012] Updating aperture counts using extracted products
[Mon Mar 19 23:25:03 2012] Error reading totcts from fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Mon Mar 19 23:25:03 2012] No arf file for this source, not re-computing flux
[Mon Mar 19 23:25:11 2012] Flag c found in src. 101 procflags, skipping spectral fitting
[Mon Mar 19 23:25:11 2012] Source 101 has no response, skipping
[Mon Mar 19 23:25:12 2012] xmm0412180101/analysis//spectral/fullrun_mos1_xmm0412180101_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete