[Fri Feb 17 18:40:22 2012] Detection parameters:
  Position = (377.4, 185.1) = 6 45 6.90 36 51 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.5 +/- 11.5
  Background counts = 3.3
  Rate = 0.008 +/- 0.001

[Fri Feb 17 18:40:22 2012] Off-axis axis estimate = 10.02'
[Fri Feb 17 19:18:33 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 19:18:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 19:18:33 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Fri Feb 17 19:18:33 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.072
[Fri Feb 17 19:18:33 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.44"
[Fri Feb 17 19:28:49 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3.ximg exists
[Fri Feb 17 19:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 19:28:49 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Feb 17 19:28:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3.csv
[Fri Feb 17 19:28:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 19:28:49 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 17 19:28:49 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 17 19:28:49 2012] Fit fullrun_mos2_xmm0411980601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Feb 17 19:28:57 2012] Spatial fit model total counts = 111.966000, observed total counts = 112.000000
[Fri Feb 17 19:28:57 2012] Offset between fit and detection position for source 2 = 0.124540 pixels
[Fri Feb 17 19:28:57 2012] 112.063800 total counts/ 52.680400 bgd. counts: snr = 8.181643
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.124540 pixels
  Position = (377.4, 185.2) = 6 45 6.90 36 51 12.5
  Extent = 5.2 (4.0-6.8)", rotation angle = 0
  Source counts = 59.4 +/- 10.6
  Background counts = 52.7
  Rate = 0.006 +/- 0.001
[Fri Feb 17 19:28:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 19:28:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 19:28:57 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 19:28:57 2012] Source does appear to be extended
[Fri Feb 17 19:28:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:04:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 20:04:12 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Fri Feb 17 20:04:12 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.782
[Fri Feb 17 20:04:12 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.20"
[Fri Feb 17 20:11:13 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3.ximg exists
[Fri Feb 17 20:11:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 20:11:13 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Feb 17 20:11:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3.csv
[Fri Feb 17 20:11:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 20:11:13 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Feb 17 20:11:13 2012] fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Feb 17 20:11:13 2012] Fit fullrun_mos2_xmm0411980601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Feb 17 20:11:21 2012] Spatial fit model total counts = 111.998000, observed total counts = 112.000000
[Fri Feb 17 20:11:21 2012] Offset between fit and detection position for source 2 = 0.007368 pixels
[Fri Feb 17 20:11:21 2012] 112.102700 total counts/ 52.971600 bgd. counts: snr = 8.124458
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007368 pixels
  Position = (377.4, 185.2) = 6 45 6.90 36 51 12.5
  Extent = 5.2 (4.0-6.8)", rotation angle = 0
  Source counts = 59.1 +/- 10.6
  Background counts = 53.0
  Rate = 0.006 +/- 0.001
[Fri Feb 17 20:11:21 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 20:11:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 20:11:21 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 20:11:21 2012] Source does appear to be extended
[Fri Feb 17 20:11:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 20:44:27 2012] XMMSAS src. selection expression = ellipse(32786.338600, 16064.317000, 309.150609, 309.150609, 0.000000, X, Y)
[Fri Feb 17 20:44:27 2012] Writing source region out to fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2_src.reg
[Fri Feb 17 20:44:27 2012] Extracting stamp from image fullrun_mos2_xmm0411980601_pi300-10000_cl_sm2.00.img.gz, (360, 167) - (395, 203)
[Fri Feb 17 20:44:27 2012] XMMSAS bgd. selection expression = annulus(32786.338600, 16064.317000, 515.251015, 1030.502030, X, Y)
[Fri Feb 17 20:44:27 2012] Writing fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2.gif
[Fri Feb 17 20:44:49 2012] Mean detx,y = (7287.34, 8716.85) 
[Fri Feb 17 20:44:50 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 20:44:56 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 20:44:56 2012] Setting source spectrum file to fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 17 20:44:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Feb 17 20:48:57 2012] Not generating rmf since there are only 59 counts
[Fri Feb 17 20:48:57 2012] rmf not generated due to insufficient counts
[Fri Feb 17 20:49:30 2012] Updating aperture counts using extracted products
[Fri Feb 17 20:49:30 2012] Error reading totcts from fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Feb 17 20:49:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 20:49:30 2012] Using photon index=1.80, rate=0.00555, arf fullrun_mos2_xmm0411980601_pi300-10000_pass1_cl_src2.arf
[Fri Feb 17 20:49:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 20:49:30 2012] Updating source flux to 1.6e-13
[Fri Feb 17 20:49:36 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting