[Sun Feb 26 17:47:33 2012] Detection parameters:
  Position = (278.3, 285.8) = 2 3 2.92 -7 41 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3288.1 +/- 68.8
  Background counts = 25.9
  Rate = 0.4 +/- 0.007

[Sun Feb 26 17:47:35 2012] Off-axis axis estimate = 1.72'
[Sun Feb 26 17:49:27 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 17:49:27 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Feb 26 17:49:27 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun Feb 26 17:49:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Feb 26 18:37:51 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 18:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 18:37:51 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 18:37:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 18:37:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 18:37:52 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 18:37:52 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 18:37:52 2012] Fit fullrun_pn_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 20:08:23 2012] Spatial fit model total counts = 2863.000000, observed total counts = 2863.000000
[Sun Feb 26 20:08:23 2012] Offset between fit and detection position for source 1 = 0.177749 pixels
[Sun Feb 26 20:08:23 2012] 2869.836000 total counts/ 703.896000 bgd. counts: snr = 81.637966
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.177749 pixels
  Position = (278.4, 285.6) = 2 3 2.92 -7 41 53.5
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 2165.9 +/- 53.6
  Background counts = 703.9
  Rate = 0.2 +/- 0.005
[Sun Feb 26 20:08:23 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 20:08:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 20:08:23 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 20:08:23 2012] Source does appear to be extended
[Sun Feb 26 20:08:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 20:08:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 20:08:47 2012] Initial guess for spatial extent in simple fitting = 5.71"
[Sun Feb 26 20:08:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.685
[Sun Feb 26 20:08:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.71"
[Sun Feb 26 20:53:55 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Feb 26 20:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 20:53:55 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Feb 26 20:53:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1.csv
[Sun Feb 26 20:53:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:53:55 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 20:53:55 2012] fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 20:53:55 2012] Fit fullrun_pn_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 22:00:02 2012] Spatial fit model total counts = 2864.980000, observed total counts = 2865.000000
[Sun Feb 26 22:00:02 2012] Offset between fit and detection position for source 1 = 0.016474 pixels
[Sun Feb 26 22:00:02 2012] 2886.493000 total counts/ 713.963000 bgd. counts: snr = 81.306999
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016474 pixels
  Position = (278.4, 285.6) = 2 3 2.92 -7 41 53.6
  Extent = 5.7 (5.5-5.9)", rotation angle = 0
  Source counts = 2172.5 +/- 53.7
  Background counts = 714.0
  Rate = 0.2 +/- 0.005
[Sun Feb 26 22:00:02 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 22:00:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 22:00:02 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 22:00:02 2012] Source does appear to be extended
[Sun Feb 26 22:00:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 22:00:24 2012] Counts = 2172.530000, rescaling region sizes by 2.000000
[Sun Feb 26 22:00:24 2012] XMMSAS src. selection expression = ellipse(24168.293200, 24796.202400, 687.780020, 687.780020, 0.000000, X, Y)
[Sun Feb 26 22:00:24 2012] Writing source region out to fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 26 22:00:24 2012] Extracting stamp from image fullrun_pn_xmm0411980201_pi300-10000_cl_sm2.00.img.gz, (239, 246) - (318, 325)
[Sun Feb 26 22:00:24 2012] XMMSAS bgd. selection expression = annulus(24168.293200, 24796.202400, 2292.600066, 4585.200132, X, Y) && !ellipse(25705.769920, 28649.331400, 381.602411, 381.602411, 0.000000, X, Y) && !ellipse(19917.814200, 28690.143400, 916.312026, 916.312026, 0.000000, X, Y) && !ellipse(26812.620400, 23934.507400, 421.032012, 421.032012, 0.000000, X, Y)
[Sun Feb 26 22:00:24 2012] Writing fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1.gif
[Sun Feb 26 22:00:48 2012] Mean detx,y = (20.10, -294.94) 
[Sun Feb 26 22:00:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 22:02:14 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 22:02:15 2012] Setting source spectrum file to fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 22:02:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 26 23:33:26 2012] Updating aperture counts using extracted products
[Sun Feb 26 23:33:26 2012] Error reading totcts from fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 23:33:28 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 23:33:28 2012] Using photon index=1.80, rate=0.217, arf fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 23:33:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 23:33:28 2012] Updating source flux to 5.5e-13
[Sun Feb 26 23:35:58 2012] Reading fit data from xmm0411980201/analysis//spectral/fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 26 23:35:58 2012] Spectral fit parameter nH value = 2.19224e+14
[Sun Feb 26 23:35:58 2012] Spectral fit parameter PhoIndex value = 2.15176
[Sun Feb 26 23:35:58 2012] Failed to get F(0.3-8.0) from xmm0411980201/analysis//spectral/fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 23:35:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 23:35:58 2012] Using Nh = 2.2e+14, photon index=2.15, rate=0.217, arf fullrun_pn_xmm0411980201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 23:35:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 23:35:58 2012] Updating source flux to 4.4e-13