[Sun Feb 26 17:47:42 2012] Detection parameters:
  Position = (130.8, 219.0) = 2 3 46.10 -7 46 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.0 +/- 9.3
  Background counts = 6.6
  Rate = 0.004 +/- 0.0007

[Sun Feb 26 17:47:42 2012] Off-axis axis estimate = 13.45'
[Sun Feb 26 19:24:28 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 19:24:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 19:24:28 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Sun Feb 26 19:24:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.128
[Sun Feb 26 19:24:28 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.15"
[Sun Feb 26 20:08:14 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9.ximg exists
[Sun Feb 26 20:08:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9.csv
[Sun Feb 26 20:08:14 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Feb 26 20:08:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9.csv
[Sun Feb 26 20:08:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 20:08:15 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb 26 20:08:15 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb 26 20:08:15 2012] Fit fullrun_mos2_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Feb 26 20:08:34 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 16.972570 pixels away
[Sun Feb 26 20:08:34 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.821533 pixels away
[Sun Feb 26 20:08:34 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 20:08:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 20:08:34 2012] Assessing source extent using major
[Sun Feb 26 20:08:34 2012] Source does appear to be extended
[Sun Feb 26 20:08:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 21:26:22 2012] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 21:26:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 21:26:22 2012] Initial guess for spatial extent in simple fitting = 13.15"
[Sun Feb 26 21:26:22 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.128
[Sun Feb 26 21:26:22 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.15"
[Sun Feb 26 21:59:55 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9.ximg exists
[Sun Feb 26 21:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9.csv
[Sun Feb 26 21:59:55 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Feb 26 21:59:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9.csv
[Sun Feb 26 21:59:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 21:59:55 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Feb 26 21:59:55 2012] fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Feb 26 21:59:55 2012] Fit fullrun_mos2_xmm0411980201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Feb 26 22:00:11 2012] Spatial fit model total counts = 152.879000, observed total counts = 153.000000
[Sun Feb 26 22:00:11 2012] Offset between fit and detection position for source 14 = 0.441174 pixels
[Sun Feb 26 22:00:11 2012] 157.350800 total counts/ 132.628000 bgd. counts: snr = 2.146743
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.441174 pixels
  Position = (131.3, 219.0) = 2 3 45.97 -7 46 43.0
  Extent = 5.9 (3.8-10.2)", rotation angle = 0
  Source counts = 24.7 +/- 12.5
  Background counts = 132.6
  Rate = 0.002 +/- 0.001
[Sun Feb 26 22:00:11 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 22:00:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 22:00:11 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 22:00:11 2012] Source does appear to be extended
[Sun Feb 26 22:00:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 23:15:46 2012] XMMSAS src. selection expression = ellipse(11370.534600, 19003.242800, 353.788810, 353.788810, 0.000000, X, Y)
[Sun Feb 26 23:15:46 2012] Writing source region out to fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14_src.reg
[Sun Feb 26 23:15:46 2012] Extracting stamp from image fullrun_mos2_xmm0411980201_pi300-10000_cl_sm2.00.img.gz, (111, 199) - (152, 239)
[Sun Feb 26 23:15:46 2012] XMMSAS bgd. selection expression = annulus(11370.534600, 19003.242800, 589.648017, 1179.296034, X, Y) && !ellipse(12512.896286, 18753.808151, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 23:15:46 2012] Writing fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14.gif
[Sun Feb 26 23:18:53 2012] Mean detx,y = (-8752.79, 11023.91) 
[Sun Feb 26 23:18:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 23:19:05 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 23:19:05 2012] Setting source spectrum file to fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 26 23:19:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Feb 26 23:31:56 2012] Not generating rmf since there are only 24 counts
[Sun Feb 26 23:31:56 2012] rmf not generated due to insufficient counts
[Sun Feb 26 23:33:31 2012] Updating aperture counts using extracted products
[Sun Feb 26 23:33:31 2012] Error reading totcts from fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Feb 26 23:33:31 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 23:33:31 2012] Using photon index=1.80, rate=0.00198, arf fullrun_mos2_xmm0411980201_pi300-10000_pass1_cl_src14.arf
[Sun Feb 26 23:33:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 23:33:31 2012] Updating source flux to 6.8e-14
[Sun Feb 26 23:34:08 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting