[Sun Feb 26 17:47:37 2012] Detection parameters:
  Position = (278.4, 287.6) = 2 3 2.91 -7 41 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 754.4 +/- 37.3
  Background counts = 5.9
  Rate = 0.07 +/- 0.004

[Sun Feb 26 17:47:39 2012] Off-axis axis estimate = 1.65'
[Sun Feb 26 18:37:52 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 18:37:52 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Feb 26 18:37:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 17, frac = 0.904
[Sun Feb 26 18:37:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sun Feb 26 19:24:28 2012] fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Feb 26 19:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 19:24:28 2012] fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Feb 26 19:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1.csv
[Sun Feb 26 19:24:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 19:24:28 2012] fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 19:24:28 2012] fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 19:24:28 2012] Fit fullrun_mos1_xmm0411980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 20:08:29 2012] Spatial fit model total counts = 755.000000, observed total counts = 755.000000
[Sun Feb 26 20:08:29 2012] Offset between fit and detection position for source 1 = 1.726926 pixels
[Sun Feb 26 20:08:29 2012] 709.421000 total counts/ 199.723000 bgd. counts: snr = 36.066076
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.726926 pixels
  Position = (278.5, 285.8) = 2 3 2.87 -7 41 52.4
  Extent = 6.1 (5.7-6.7)", rotation angle = 0
  Source counts = 509.7 +/- 26.6
  Background counts = 199.7
  Rate = 0.04 +/- 0.002
[Sun Feb 26 20:08:29 2012] Spatial fit model total counts = 576.615000, observed total counts = 581.000000
[Sun Feb 26 20:08:29 2012] Offset between fit and detection position for source 1 = 0.524668 pixels
[Sun Feb 26 20:08:29 2012] Warning, changing simple spatial fit ID from 1 to 15
[Sun Feb 26 20:08:29 2012] 568.939000 total counts/ 190.730000 bgd. counts: snr = 27.385606
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.524668 pixels
  Position = (278.5, 286.4) = 2 3 2.86 -7 41 50.2
  Extent = 5.0 (4.6-5.5)", rotation angle = 0
  Source counts = 378.2 +/- 23.9
  Background counts = 190.7
  Rate = 0.03 +/- 0.002
[Sun Feb 26 20:08:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 20:08:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 20:08:29 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 20:08:29 2012] Source does appear to be extended
[Sun Feb 26 20:08:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 20:08:29 2012] Source is confused with source 8
[Sun Feb 26 20:53:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 20:53:55 2012] Initial guess for spatial extent in simple fitting = 5.05"
[Sun Feb 26 20:53:55 2012] source mask rpix=1.2, npix_max = 11, mask sum = 4, frac = 0.363
[Sun Feb 26 20:53:55 2012] Skipping simple spatial due to low active detector fraction
[Sun Feb 26 22:00:06 2012] Spatial fit model total counts = 580.768000, observed total counts = 581.000000
[Sun Feb 26 22:00:06 2012] Offset between fit and detection position for source 1 = 0.015053 pixels
[Sun Feb 26 22:00:06 2012] Warning, changing simple spatial fit ID from -1 to 13
[Sun Feb 26 22:00:06 2012] 577.163000 total counts/ 187.831000 bgd. counts: snr = 28.407726
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015053 pixels
  Position = (278.5, 286.4) = 2 3 2.87 -7 41 50.2
  Extent = 5.2 (4.7-5.8)", rotation angle = 0
  Source counts = 389.3 +/- 24.0
  Background counts = 187.8
  Rate = 0.03 +/- 0.002
[Sun Feb 26 22:00:06 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 22:00:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 22:00:06 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 22:00:06 2012] Source does appear to be extended
[Sun Feb 26 22:00:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 22:51:56 2012] XMMSAS src. selection expression = ellipse(24182.954600, 24864.206000, 314.551877, 314.551877, 0.000000, X, Y)
[Sun Feb 26 22:51:56 2012] Writing source region out to fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_src.reg
[Sun Feb 26 22:51:56 2012] Extracting stamp from image fullrun_mos1_xmm0411980201_pi300-10000_cl_sm2.00.img.gz, (260, 268) - (297, 304)
[Sun Feb 26 22:51:56 2012] XMMSAS bgd. selection expression = annulus(24182.954600, 24864.206000, 524.253128, 1048.506256, X, Y) && !ellipse(24060.108551, 25420.646454, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 22:51:56 2012] Writing fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1.gif
[Sun Feb 26 22:51:59 2012] Mean detx,y = (345.30, -288.90) 
[Sun Feb 26 22:52:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 22:52:14 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 22:52:15 2012] Setting source spectrum file to fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 22:52:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Feb 26 23:33:29 2012] Updating aperture counts using extracted products
[Sun Feb 26 23:33:29 2012] Error reading totcts from fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Feb 26 23:33:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 23:33:30 2012] Using photon index=1.80, rate=0.0313, arf fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 23:33:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 23:33:30 2012] Updating source flux to 4.5e-13
[Sun Feb 26 23:33:33 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Feb 26 23:34:08 2012] Reading fit data from xmm0411980201/analysis//spectral/fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Feb 26 23:34:08 2012] Spectral fit parameter nH value = 1.4576e+14
[Sun Feb 26 23:34:08 2012] Spectral fit parameter PhoIndex value = 2.03476
[Sun Feb 26 23:34:08 2012] Failed to get F(0.3-8.0) from xmm0411980201/analysis//spectral/fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Feb 26 23:34:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 23:34:08 2012] Using Nh = 1.5e+14, photon index=2.03, rate=0.0313, arf fullrun_mos1_xmm0411980201_pi300-10000_pass1_cl_src1.arf
[Sun Feb 26 23:34:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 23:34:08 2012] Updating source flux to 4.1e-13