[Fri Jun 7 15:35:11 2013] Detection parameters: Position = (141.8, 193.4) = 21 59 37.72 -30 20 17.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 333.8 +/- 22.2 Background counts = 44.9 Rate = 0.005 +/- 0.0003 [Fri Jun 7 15:35:11 2013] Off-axis axis estimate = 13.67' [Fri Jun 7 21:30:05 2013] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting [Fri Jun 7 21:30:05 2013] Initial guess for spatial extent in simple fitting = 13.27" [Fri Jun 7 21:30:05 2013] source mask rpix=3.0, npix_max = 50, mask sum = 37, frac = 0.734 [Fri Jun 7 21:30:05 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 13.27" [Sat Jun 8 00:10:34 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8.ximg exists [Sat Jun 8 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8.csv [Sat Jun 8 00:10:34 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8_1.ximg exists [Sat Jun 8 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8.csv [Sat Jun 8 00:10:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 00:10:34 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sat Jun 8 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 8 00:10:34 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sat Jun 8 00:10:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 8 00:10:34 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411782101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 01:57:14 2013] Source 15 is offset by -5.035497 and -0.263931 pixels which is larger than 2 X fitted extent = 1.578874 x 1.578874, not incorporating fit results [Sat Jun 8 01:57:14 2013] Warning, spatial fit 8 centroid is now closest to src. 27 [Sat Jun 8 01:57:14 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 01:57:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 01:57:14 2013] Assessing source extent using major [Sat Jun 8 01:57:14 2013] Source does appear to be extended [Sat Jun 8 01:57:14 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 01:57:14 2013] Source is confused with source 11 [Sat Jun 8 02:20:13 2013] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting [Sat Jun 8 02:20:13 2013] Initial guess for spatial extent in simple fitting = 13.27" [Sat Jun 8 02:20:13 2013] source mask rpix=3.0, npix_max = 50, mask sum = 37, frac = 0.734 [Sat Jun 8 02:20:13 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 13.27" [Sat Jun 8 04:42:45 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8.ximg exists [Sat Jun 8 04:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8.csv [Sat Jun 8 04:42:45 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8_1.ximg exists [Sat Jun 8 04:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8.csv [Sat Jun 8 04:42:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 04:42:45 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sat Jun 8 04:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8.csv [Sat Jun 8 04:42:45 2013] fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sat Jun 8 04:42:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8.csv [Sat Jun 8 04:42:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411782101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 8 05:34:01 2013] Warning, spatial fit 8 centroid is now closest to src. 11 [Sat Jun 8 05:34:01 2013] Vigneting correction estimate = 1.000000 [Sat Jun 8 05:34:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 8 05:34:01 2013] Assessing source extent using major [Sat Jun 8 05:34:01 2013] Source does appear to be extended [Sat Jun 8 05:34:01 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 8 06:11:28 2013] XMMSAS src. selection expression = ellipse(12287.607758, 16776.564026, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 8 06:11:28 2013] Writing source region out to fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_src.reg [Sat Jun 8 06:11:28 2013] Extracting stamp from image fullrun_mos1_xmm0411782101_pi300-10000_cl_sm2.00.img.gz, (104, 156) - (179, 231) [Sat Jun 8 06:11:28 2013] XMMSAS bgd. selection expression = annulus(12287.607758, 16776.564026, 1087.500000, 2175.000000, X, Y) && !ellipse(10147.493515, 17815.727890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11114.370224, 17325.253708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11706.773636, 17038.554352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10643.653442, 17553.270279, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 8 06:11:28 2013] Writing fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15.gif [Sat Jun 8 06:19:50 2013] Mean detx,y = (12727.98, 6984.48) [Sat Jun 8 06:19:53 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 8 06:20:18 2013] Binned source spectrum to 10 counts/bin [Sat Jun 8 06:20:19 2013] Setting source spectrum file to fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Sat Jun 8 06:20:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Sat Jun 8 06:30:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 8 06:30:11 2013] rmf not generated due to insufficient counts [Sat Jun 8 07:00:20 2013] Updating aperture counts using extracted products [Sat Jun 8 07:00:20 2013] Total counts from fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 713.00 [Sat Jun 8 07:00:20 2013] Total counts from fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 420.00 [Sat Jun 8 07:00:20 2013] Got source and background scale factors 703572.000000, 2178247.000000 [Sat Jun 8 07:00:20 2013] User source parameters: Position = (141.8, 193.4) = 21 59 37.72 -30 20 17.3 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 577.3 +/- 27.7 Background aperture counts = 135.7 Rate = 0.009 +/- 0.0004 [Sat Jun 8 07:00:20 2013] Updating counts from extracted products [Sat Jun 8 07:00:20 2013] Set source signif. to 577.34/11.65 = 49.57 [Sat Jun 8 07:00:22 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 8 07:00:22 2013] Using photon index=1.80, rate=0.00855, arf fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15.arf [Sat Jun 8 07:00:22 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 8 07:00:22 2013] Updating source flux to 2.4e-13 [Sat Jun 8 07:00:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 8 07:00:27 2013] xmm0411782101/analysis//spectral/fullrun_mos1_xmm0411782101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete