[Mon Aug  6 11:00:52 2012] Detection parameters:
  Position = (278.9, 285.1) = 21 58 51.83 -30 13 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 536075.8 +/- 788.5
  Background counts = 139.3
  Rate = 8 +/- 0.01

[Mon Aug  6 11:00:53 2012] Off-axis axis estimate = 1.72'
[Mon Aug  6 12:44:53 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 12:44:53 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Aug  6 12:44:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Mon Aug  6 12:44:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Aug  6 13:52:51 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug  6 13:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 13:52:51 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug  6 13:52:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1.csv
[Mon Aug  6 13:52:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 13:52:51 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug  6 13:52:51 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug  6 13:52:51 2012] Fit fullrun_mos2_xmm0411780501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug  6 13:53:03 2012] Spatial fit model total counts = 435922.000000, observed total counts = 432450.000000
[Mon Aug  6 13:53:03 2012] Offset between fit and detection position for source 1 = 0.095177 pixels
[Mon Aug  6 13:53:03 2012] 403570.000000 total counts/ 25600.000000 bgd. counts: snr = 2362.312500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.095177 pixels
  Position = (278.9, 285.2) = 21 58 51.82 -30 13 32.2
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 377970.0 +/- 635.3
  Background counts = 25600.0
  Rate = 6 +/- 0.01
[Mon Aug  6 13:53:03 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 13:53:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 13:53:03 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 13:53:03 2012] Source does appear to be extended
[Mon Aug  6 13:53:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 14:39:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug  6 14:39:01 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Mon Aug  6 14:39:01 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.999
[Mon Aug  6 14:39:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.53"
[Mon Aug  6 15:20:30 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug  6 15:20:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1.csv
[Mon Aug  6 15:20:30 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug  6 15:20:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1.csv
[Mon Aug  6 15:20:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 15:20:31 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug  6 15:20:31 2012] fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug  6 15:20:31 2012] Fit fullrun_mos2_xmm0411780501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug  6 15:20:36 2012] Spatial fit model total counts = 409352.000000, observed total counts = 430501.000000
[Mon Aug  6 15:20:36 2012] Offset between fit and detection position for source 1 = 0.008340 pixels
[Mon Aug  6 15:20:36 2012] 402550.000000 total counts/ 25600.000000 bgd. counts: snr = 2355.937500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008340 pixels
  Position = (278.9, 285.2) = 21 58 51.82 -30 13 32.2
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 376950.0 +/- 634.5
  Background counts = 25600.0
  Rate = 6 +/- 0.01
[Mon Aug  6 15:20:36 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 15:20:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 15:20:36 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 15:20:36 2012] Source does appear to be extended
[Mon Aug  6 15:20:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug  7 10:53:52 2012] Counts = 376950.000000, rescaling region sizes by 3.000000
[Tue Aug  7 10:53:52 2012] XMMSAS src. selection expression = ellipse(24217.392800, 24762.894400, 1170.025234, 1170.025234, 0.000000, X, Y)
[Tue Aug  7 10:53:52 2012] Writing source region out to fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug  7 10:53:52 2012] Extracting stamp from image fullrun_mos2_xmm0411780501_pi300-10000_cl_sm2.00.img.gz, (212, 218) - (346, 352)
[Tue Aug  7 10:53:52 2012] XMMSAS bgd. selection expression = annulus(24217.392800, 24762.894400, 5850.126168, 11700.252337, X, Y) && !ellipse(23728.312195, 25777.647003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23156.541016, 24635.010010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23361.729645, 25370.174347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23212.078918, 25018.661743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31846.948395, 25043.042877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13015.722992, 31344.773499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36674.593475, 22654.392670, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug  7 10:53:52 2012] Writing fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1.gif
[Tue Aug  7 10:54:27 2012] Mean detx,y = (144.79, 123.72) 
[Tue Aug  7 10:54:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug  7 10:59:13 2012] Binned source spectrum to 10 counts/bin
[Tue Aug  7 10:59:14 2012] Setting source spectrum file to fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 10:59:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug  7 12:30:54 2012] Updating aperture counts using extracted products
[Tue Aug  7 12:30:54 2012] Error reading totcts from fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug  7 12:30:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 12:30:55 2012] Using photon index=1.80, rate=5.93, arf fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 12:30:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 12:30:55 2012] Updating source flux to 6.1e-11
[Tue Aug  7 12:32:15 2012] Reading fit data from xmm0411780501/analysis//spectral/fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug  7 12:32:15 2012] Spectral fit parameter nH value = 2.23768e+20
[Tue Aug  7 12:32:15 2012] Spectral fit parameter PhoIndex value = 2.77916
[Tue Aug  7 12:32:15 2012] Failed to get F(0.3-8.0) from xmm0411780501/analysis//spectral/fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug  7 12:32:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug  7 12:32:15 2012] Using Nh = 2.2e+20, photon index=2.78, rate=5.93, arf fullrun_mos2_xmm0411780501_pi300-10000_pass1_cl_src1.arf
[Tue Aug  7 12:32:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug  7 12:32:15 2012] Updating source flux to 4.7e-11