[Tue Jul  3 17:48:36 2012] Detection parameters:
  Position = (280.6, 282.8) = 21 58 51.97 -30 13 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 899730.1 +/- 1045.4
  Background counts = 110.0
  Rate = 1e+01 +/- 0.02

[Tue Jul  3 17:48:37 2012] Off-axis axis estimate = 1.72'
[Wed Jul  4 04:16:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Jul  4 04:16:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Jul  4 04:16:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Wed Jul  4 04:16:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Jul  4 05:41:49 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul  4 05:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 05:41:49 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul  4 05:41:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1.csv
[Wed Jul  4 05:41:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 05:41:49 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul  4 05:41:49 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul  4 05:41:49 2012] Fit fullrun_mos2_xmm0411780401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul  4 05:41:54 2012] Spatial fit model total counts = 790193.000000, observed total counts = 769518.000000
[Wed Jul  4 05:41:54 2012] Offset between fit and detection position for source 1 = 0.210219 pixels
[Wed Jul  4 05:41:54 2012] 723164.000000 total counts/ 25600.000000 bgd. counts: snr = 4359.775000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.210219 pixels
  Position = (280.6, 282.6) = 21 58 51.98 -30 13 32.9
  Extent = 7.3 (7.3-7.3)", rotation angle = 0
  Source counts = 697564.0 +/- 850.4
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.01
[Wed Jul  4 05:41:54 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 05:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 05:41:54 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 05:41:54 2012] Source does appear to be extended
[Wed Jul  4 05:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul  4 05:56:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul  4 05:56:54 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Wed Jul  4 05:56:54 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.314
[Wed Jul  4 05:56:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Wed Jul  4 11:05:48 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul  4 11:05:48 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul  4 11:05:48 2012] Fit fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jul  4 11:05:48 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul  4 11:05:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul  4 11:05:48 2012] fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul  4 11:05:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul  4 11:05:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul  4 11:05:53 2012] Spatial fit model total counts = 748024.000000, observed total counts = 770301.000000
[Wed Jul  4 11:05:53 2012] Offset between fit and detection position for source 1 = 0.048774 pixels
[Wed Jul  4 11:05:53 2012] 695020.000000 total counts/ 25600.000000 bgd. counts: snr = 4183.875000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.048774 pixels
  Position = (280.6, 282.6) = 21 58 51.96 -30 13 33.0
  Extent = 7.3 (7.3-7.3)" x 6.4 (6.4-6.4)", rotation angle = 346 (346-347) degrees
  Source counts = 669420.0 +/- 833.7
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.01
[Wed Jul  4 11:05:53 2012] Vigneting correction estimate = 1.000000
[Wed Jul  4 11:05:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul  4 11:05:53 2012] Assessing source extent using major axis lower bound
[Wed Jul  4 11:05:53 2012] Source does appear to be extended
[Wed Jul  4 11:05:53 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Wed Jul  4 12:27:39 2012] Counts = 669420.000000, rescaling region sizes by 3.000000
[Wed Jul  4 12:27:39 2012] XMMSAS src. selection expression = ellipse(24364.432000, 24535.675600, 1305.950438, 1145.332833, 346.445000, X, Y)
[Wed Jul  4 12:27:39 2012] Writing source region out to fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul  4 12:27:39 2012] Extracting stamp from image fullrun_mos2_xmm0411780401_pi300-10000_cl_sm2.00.img.gz, (206, 208) - (356, 358)
[Wed Jul  4 12:27:39 2012] XMMSAS bgd. selection expression = annulus(24364.432000, 24535.675600, 6529.752188, 13059.504376, X, Y) && !ellipse(23717.761108, 25434.872101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23458.996643, 25004.786560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23393.507690, 24576.426788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32014.648010, 24840.419006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21956.941840, 14336.025200, 856.180025, 856.180025, 0.000000, X, Y)
[Wed Jul  4 12:27:39 2012] Writing fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1.gif
[Wed Jul  4 12:28:20 2012] Mean detx,y = (98.24, 119.61) 
[Wed Jul  4 12:28:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul  4 12:32:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jul  4 12:32:01 2012] Setting source spectrum file to fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 12:32:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jul  4 14:00:27 2012] Updating aperture counts using extracted products
[Wed Jul  4 14:00:27 2012] Error reading totcts from fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul  4 14:00:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:00:27 2012] Using photon index=1.80, rate=10.9, arf fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 14:00:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:00:27 2012] Updating source flux to 1.1e-10
[Wed Jul  4 14:01:05 2012] Reading fit data from xmm0411780401/analysis//spectral/fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jul  4 14:01:05 2012] Spectral fit parameter nH value = 2.27633e+20
[Wed Jul  4 14:01:05 2012] Spectral fit parameter PhoIndex value = 2.79997
[Wed Jul  4 14:01:05 2012] Failed to get F(0.3-8.0) from xmm0411780401/analysis//spectral/fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jul  4 14:01:05 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul  4 14:01:05 2012] Using Nh = 2.3e+20, photon index=2.80, rate=10.9, arf fullrun_mos2_xmm0411780401_pi300-10000_pass1_cl_src1.arf
[Wed Jul  4 14:01:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul  4 14:01:05 2012] Updating source flux to 8.3e-11