[Sat Dec 24 11:48:20 2011] Detection parameters:
  Position = (296.2, 328.0) = 21 58 46.33 -30 10 18.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4364.8 +/- 89.2
  Background counts = 334.7
  Rate = 0.1 +/- 0.002

[Sat Dec 24 11:48:21 2011] Off-axis axis estimate = 2.15'
[Sat Dec 24 12:27:26 2011] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 12:27:26 2011] Initial guess for spatial extent in simple fitting = 7.50"
[Sat Dec 24 12:27:26 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Sat Dec 24 12:27:26 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.50"
[Sun Dec 25 07:00:11 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 25 07:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 07:00:11 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 25 07:00:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1.csv
[Sun Dec 25 07:00:11 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 07:00:11 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 25 07:00:11 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 25 07:00:11 2011] Fit fullrun_pn_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 25 13:52:50 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Sun Dec 25 13:52:50 2011] Spatial fit model total counts = 18545.600000, observed total counts = 18538.000000
[Sun Dec 25 13:52:50 2011] Offset between fit and detection position for source 1 = 2.677487 pixels
[Sun Dec 25 13:52:50 2011] Warning, changing simple spatial fit ID from 1 to 2
[Sun Dec 25 13:52:50 2011] 17785.870000 total counts/ 10525.200000 bgd. counts: snr = 70.772008
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.677487 pixels
  Position = (295.0, 325.6) = 21 58 46.72 -30 10 31.1
  Extent = 14.7 (14.7-29.3)" x 5.0 (4.8-5.1)", rotation angle = 111 (110-111) degrees
  Source counts = 7260.7 +/- 133.4
  Background counts = 10525.2
  Rate = 0.1 +/- 0.002
[Sun Dec 25 13:52:50 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:52:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:52:50 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 13:52:50 2011] Source does appear to be extended
[Sun Dec 25 13:52:50 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.86
[Sun Dec 25 13:52:50 2011] Source is asymmetric
[Sun Dec 25 13:52:50 2011] Source is confused with source 2
[Sun Dec 25 13:52:50 2011] Source is confused with source 3
[Sun Dec 25 13:53:26 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 13:53:26 2011] Initial guess for spatial extent in simple fitting = 9.82"
[Sun Dec 25 13:53:26 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.987
[Sun Dec 25 13:53:26 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.82"
[Tue Dec 27 20:19:34 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Dec 27 20:19:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 20:19:34 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Dec 27 20:19:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1.csv
[Tue Dec 27 20:19:34 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 20:19:34 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Dec 27 20:19:34 2011] fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Dec 27 20:19:34 2011] Fit fullrun_pn_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 05:05:36 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Wed Dec 28 05:05:36 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:05:36 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 05:05:36 2011] Source does appear to be extended
[Wed Dec 28 05:05:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.86
[Wed Dec 28 05:05:36 2011] Source is asymmetric
[Wed Dec 28 05:06:07 2011] Counts = 7260.670000, rescaling region sizes by 2.000000
[Wed Dec 28 05:06:07 2011] XMMSAS src. selection expression = ellipse(25616.069000, 28275.893800, 1759.356051, 596.390417, 110.740100, X, Y)
[Wed Dec 28 05:06:07 2011] Writing source region out to fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_src.reg
[Wed Dec 28 05:06:07 2011] Extracting stamp from image fullrun_pn_xmm0411780301_pi300-10000_cl_sm2.00.img.gz, (194, 224) - (396, 427)
[Wed Dec 28 05:06:07 2011] XMMSAS bgd. selection expression = annulus(25616.069000, 28275.893800, 5864.520169, 11729.040337, X, Y) && !ellipse(25588.232000, 28117.010000, 3442.176099, 3442.176099, 0.000000, X, Y) && !ellipse(25472.161492, 27900.158219, 6884.352198, 1358.068328, 111.214201, X, Y) && !ellipse(24783.964000, 26797.908000, 3374.280097, 3374.280097, 0.000000, X, Y) && !ellipse(25050.644226, 24284.519592, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24744.630859, 25349.486359, 5220.000000, 5220.000000, 0.000000, X, Y) && !ellipse(24257.950000, 24784.265800, 5151.264148, 5151.264148, 0.000000, X, Y) && !ellipse(24272.326800, 24633.927600, 1314.357638, 1314.357638, 0.000000, X, Y)
[Wed Dec 28 05:06:07 2011] Writing fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1.gif
[Wed Dec 28 05:20:59 2011] Mean detx,y = (-65.79, 3319.28) 
[Wed Dec 28 05:21:32 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 05:27:05 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 05:27:06 2011] Setting source spectrum file to fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Dec 28 05:27:06 2011] Setting bgd. spectrum file to fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jan  1 09:07:01 2012] Updating aperture counts using extracted products
[Sun Jan  1 09:07:01 2012] Error reading totcts from fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 09:07:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 09:07:01 2012] Using photon index=1.80, rate=0.119, arf fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 09:07:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 09:07:01 2012] Updating source flux to 5.4e-13
[Sun Jan  1 09:10:25 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jan  1 09:12:30 2012] Reading fit data from xmm0411780301/analysis//spectral/fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jan  1 09:12:30 2012] Spectral fit parameter nH value = 2.32717e+12
[Sun Jan  1 09:12:30 2012] Spectral fit parameter PhoIndex value = 2.47221
[Sun Jan  1 09:12:30 2012] Failed to get F(0.3-8.0) from xmm0411780301/analysis//spectral/fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 09:12:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 09:12:30 2012] Using Nh = 2.3e+12, photon index=2.47, rate=0.119, arf fullrun_pn_xmm0411780301_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 09:12:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 09:12:30 2012] Updating source flux to 3.8e-13