[Sat Dec 24 11:49:56 2011] Detection parameters:
  Position = (333.6, 469.1) = 21 58 33.80 -30 0 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.7 +/- 10.9
  Background counts = 20.8
  Rate = 0.0009 +/- 0.0002

[Sat Dec 24 11:49:58 2011] Off-axis axis estimate = 12.63'
[Sun Dec 25 08:38:17 2011] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:38:17 2011] Initial guess for spatial extent in simple fitting = 12.74"
[Sun Dec 25 08:38:17 2011] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.020
[Sun Dec 25 08:38:17 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 12.74"
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29.csv
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29.csv
[Sun Dec 25 13:52:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:52:46 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun Dec 25 13:52:46 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Dec 25 13:52:46 2011] Fit fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Dec 25 13:53:12 2011] Source 5 is offset by 6.568505 and 0.082649 pixels which is larger than
2 X fitted extent = 1.500639 x 1.500639, not incorporating fit results
[Sun Dec 25 13:53:12 2011] Spatial fit model total counts = 293.319000, observed total counts = 295.000000
[Sun Dec 25 13:53:12 2011] Offset between fit and detection position for source 5 = 0.071438 pixels
[Sun Dec 25 13:53:12 2011] 290.642900 total counts/ 267.585000 bgd. counts: snr = 1.409577
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.071438 pixels
  Position = (333.6, 469.0) = 21 58 33.81 -30 0 7.1
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 23.1 +/- 17.0
  Background counts = 267.6
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability