[Sat Dec 24 11:49:58 2011] Detection parameters:
  Position = (231.6, 155.8) = 21 59 8.04 -30 22 51.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.6 +/- 12.1
  Background counts = 22.1
  Rate = 0.001 +/- 0.0002

[Sat Dec 24 11:49:58 2011] Off-axis axis estimate = 11.42'
[Sun Dec 25 08:38:17 2011] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:38:17 2011] Initial guess for spatial extent in simple fitting = 12.14"
[Sun Dec 25 08:38:17 2011] source mask rpix=2.8, npix_max = 43, mask sum = 41, frac = 0.947
[Sun Dec 25 08:38:17 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 12.14"
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23.csv
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23.csv
[Sun Dec 25 13:52:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:52:46 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Dec 25 13:52:46 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Dec 25 13:52:46 2011] Fit fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Dec 25 13:53:12 2011] Spatial fit model total counts = 482.469000, observed total counts = 479.000000
[Sun Dec 25 13:53:12 2011] Offset between fit and detection position for source 31 = 1.780766 pixels
[Sun Dec 25 13:53:12 2011] Warning, changing simple spatial fit ID from 23 to 15
[Sun Dec 25 13:53:12 2011] 390.451440 total counts/ 382.693000 bgd. counts: snr = 0.396597
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.780766 pixels
  Position = (231.8, 157.5) = 21 59 7.97 -30 22 41.9
  Extent = 3.9 (3.4-4.2)", rotation angle = 0
  Source counts = 7.8 +/- 19.8
  Background counts = 382.7
  Rate = 0.0001 +/- 0.0003
  Deleting source due to low Poisson probability