[Sat Dec 24 11:49:56 2011] Detection parameters:
  Position = (268.2, 285.1) = 21 58 55.70 -30 13 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2335.1 +/- 87.0
  Background counts = 45.7
  Rate = 0.05 +/- 0.002

[Sat Dec 24 11:49:58 2011] Off-axis axis estimate = 2.39'
[Sun Dec 25 08:38:17 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:38:17 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Dec 25 08:38:17 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.690
[Sun Dec 25 08:38:17 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.63"
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4.csv
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4.csv
[Sun Dec 25 13:52:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Dec 25 13:52:45 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Dec 25 13:52:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Dec 25 13:52:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 13:53:12 2011] Source 3 is offset by -7.670149 and 0.993666 pixels which is larger than
2 X fitted extent = 2.288262 x 6.910483, not incorporating fit results
[Sun Dec 25 13:53:12 2011] Source 3 is offset by -6.771552 and 2.939045 pixels which is larger than
2 X fitted extent = 3.191278 x 3.191278, not incorporating fit results
[Sun Dec 25 13:53:12 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 13:53:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 13:53:12 2011] Assessing source extent using major
[Sun Dec 25 13:53:12 2011] Source does appear to be extended
[Sun Dec 25 13:53:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 13:53:12 2011] Source is confused with source 2
[Tue Dec 27 20:58:00 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 20:58:00 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Tue Dec 27 20:58:00 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.690
[Tue Dec 27 20:58:00 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.63"
[Wed Dec 28 05:05:27 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Dec 28 05:05:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4.csv
[Wed Dec 28 05:05:27 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Dec 28 05:05:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4.csv
[Wed Dec 28 05:05:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:05:28 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Dec 28 05:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Dec 28 05:05:28 2011] fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Dec 28 05:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed Dec 28 05:05:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:05:50 2011] Source 3 is offset by -7.670149 and 0.993666 pixels which is larger than
2 X fitted extent = 6.910483 x 2.165759, not incorporating fit results
[Wed Dec 28 05:05:50 2011] Source 3 is offset by -6.771552 and 2.942747 pixels which is larger than
2 X fitted extent = 3.192281 x 3.192281, not incorporating fit results
[Wed Dec 28 05:05:50 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:05:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:05:50 2011] Assessing source extent using major
[Wed Dec 28 05:05:50 2011] Source does appear to be extended
[Wed Dec 28 05:05:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 06:29:18 2012] Counts = 2335.100830, rescaling region sizes by 2.000000
[Sun Jan  1 06:29:18 2012] XMMSAS src. selection expression = ellipse(23288.411011, 24753.734955, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jan  1 06:29:18 2012] Writing source region out to fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3_src.reg
[Sun Jan  1 06:29:18 2012] Extracting stamp from image fullrun_mos2_xmm0411780301_pi300-10000_cl_sm2.00.img.gz, (193, 210) - (343, 360)
[Sun Jan  1 06:29:18 2012] XMMSAS bgd. selection expression = annulus(23288.411011, 24753.734955, 4350.000000, 8700.000000, X, Y) && !ellipse(24262.079800, 24606.677000, 1768.836051, 1657.248048, 344.277000, X, Y) && !ellipse(23414.195679, 25177.703308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23724.876587, 25592.633942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31906.597400, 24974.062400, 460.660644, 460.660644, 0.000000, X, Y)
[Sun Jan  1 06:29:18 2012] Writing fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3.gif
[Sun Jan  1 06:50:40 2012] Mean detx,y = (59.37, 157.45) 
[Sun Jan  1 06:50:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 06:54:17 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 06:54:17 2012] Setting source spectrum file to fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 06:54:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jan  1 08:07:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 08:07:44 2012] rmf not generated due to insufficient counts
[Sun Jan  1 09:07:03 2012] Updating aperture counts using extracted products
[Sun Jan  1 09:07:04 2012] Error reading totcts from fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jan  1 09:07:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 09:07:04 2012] Using photon index=1.80, rate=0.0487, arf fullrun_mos2_xmm0411780301_pi300-10000_pass1_cl_src3.arf
[Sun Jan  1 09:07:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 09:07:04 2012] Updating source flux to 4.8e-13
[Sun Jan  1 09:08:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting