[Sat Feb 11 01:42:35 2012] Detection parameters:
  Position = (278.2, 286.1) = 21 58 51.93 -30 13 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 880108.6 +/- 995.6
  Background counts = 217.1
  Rate = 2e+01 +/- 0.02

[Sat Feb 11 01:42:35 2012] Off-axis axis estimate = 1.72'
[Sat Feb 11 03:35:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 03:35:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Feb 11 03:35:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Feb 11 03:35:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Feb 11 03:41:13 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Feb 11 03:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1.csv
[Sat Feb 11 03:41:13 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Feb 11 03:41:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1.csv
[Sat Feb 11 03:41:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 03:41:13 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Feb 11 03:41:13 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Feb 11 03:41:13 2012] Fit fullrun_mos1_xmm0411780201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Feb 11 04:12:52 2012] Spatial fit model total counts = 654231.000000, observed total counts = 694912.000000
[Sat Feb 11 04:12:52 2012] Offset between fit and detection position for source 2 = 0.108199 pixels
[Sat Feb 11 04:12:52 2012] 653771.000000 total counts/ 25600.000000 bgd. counts: snr = 3926.068750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.108199 pixels
  Position = (278.3, 286.2) = 21 58 51.92 -30 13 32.4
  Extent = 7.9 (7.9-7.9)", rotation angle = 0
  Source counts = 628171.0 +/- 808.6
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Feb 11 04:12:52 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 04:12:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 04:12:52 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 04:12:52 2012] Source does appear to be extended
[Sat Feb 11 04:12:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 08:55:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 08:55:51 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Sat Feb 11 08:55:51 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.937
[Sat Feb 11 08:55:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.87"
[Sat Feb 11 09:00:40 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Feb 11 09:00:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1.csv
[Sat Feb 11 09:00:40 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Feb 11 09:00:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1.csv
[Sat Feb 11 09:00:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 09:00:40 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Feb 11 09:00:40 2012] fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Feb 11 09:00:40 2012] Fit fullrun_mos1_xmm0411780201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Feb 11 09:45:58 2012] Spatial fit model total counts = 654238.000000, observed total counts = 694912.000000
[Sat Feb 11 09:45:58 2012] Offset between fit and detection position for source 2 = 0.000486 pixels
[Sat Feb 11 09:45:58 2012] 653781.000000 total counts/ 25600.000000 bgd. counts: snr = 3926.131250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000486 pixels
  Position = (278.3, 286.2) = 21 58 51.92 -30 13 32.4
  Extent = 7.9 (7.9-7.9)", rotation angle = 0
  Source counts = 628181.0 +/- 808.6
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Sat Feb 11 09:45:58 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 09:45:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 09:45:58 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 09:45:58 2012] Source does appear to be extended
[Sat Feb 11 09:45:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 18:40:29 2012] Counts = 628181.000000, rescaling region sizes by 3.000000
[Sat Feb 11 18:40:29 2012] XMMSAS src. selection expression = ellipse(24159.619800, 24847.549200, 1417.762841, 1417.762841, 0.000000, X, Y)
[Sat Feb 11 18:40:29 2012] Writing source region out to fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_src.reg
[Sat Feb 11 18:40:29 2012] Extracting stamp from image fullrun_mos1_xmm0411780201_pi300-10000_cl_sm2.00.img.gz, (197, 205) - (360, 368)
[Sat Feb 11 18:40:29 2012] XMMSAS bgd. selection expression = annulus(24159.619800, 24847.549200, 7088.814204, 14177.628408, X, Y) && !ellipse(21733.421417, 14670.622665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21117.411000, 18783.105800, 1103.488032, 1103.488032, 0.000000, X, Y)
[Sat Feb 11 18:40:29 2012] Writing fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2.gif
[Sat Feb 11 18:41:12 2012] Mean detx,y = (318.89, -260.89) 
[Sat Feb 11 18:41:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 18:45:00 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 18:45:00 2012] Setting source spectrum file to fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Feb 11 18:45:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Feb 11 20:45:33 2012] Updating aperture counts using extracted products
[Sat Feb 11 20:45:33 2012] Error reading totcts from fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Feb 11 20:45:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 20:45:33 2012] Using photon index=1.80, rate=12.5, arf fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2.arf
[Sat Feb 11 20:45:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 20:45:33 2012] Updating source flux to 1.2e-10
[Sat Feb 11 20:45:58 2012] Reading fit data from xmm0411780201/analysis//spectral/fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_pl.csv
[Sat Feb 11 20:45:58 2012] Spectral fit parameter nH value = 6.81558e+19
[Sat Feb 11 20:45:58 2012] Spectral fit parameter PhoIndex value = 2.61262
[Sat Feb 11 20:45:58 2012] Failed to get F(0.3-8.0) from xmm0411780201/analysis//spectral/fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Feb 11 20:45:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 20:45:58 2012] Using Nh = 6.8e+19, photon index=2.61, rate=12.5, arf fullrun_mos1_xmm0411780201_pi300-10000_pass1_cl_src2.arf
[Sat Feb 11 20:45:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 20:45:58 2012] Updating source flux to 9.1e-11