[Fri Jun  8 20:02:18 2012] Detection parameters:
  Position = (283.2, 273.6) = 21 59 3.81 -30 16 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.1 +/- 17.1
  Background counts = 112.2
  Rate = 0.006 +/- 0.001

[Fri Jun  8 20:02:18 2012] Off-axis axis estimate = 2.11'
[Fri Jun  8 20:15:06 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:15:06 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Jun  8 20:15:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.710
[Fri Jun  8 20:15:06 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.48"
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3.csv
[Fri Jun  8 20:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun  8 20:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:12 2012] Source 3 is offset by -4.916810 and -4.402261 pixels which is larger than
2 X fitted extent = 0.860257 x 0.860257, not incorporating fit results
[Sat Jun  9 20:03:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:12 2012] Assessing source extent using major
[Sat Jun  9 20:03:12 2012] Source does appear to be extended
[Sat Jun  9 20:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:12 2012] Deleting source due to low Poisson probability 0.8