[Fri Jun  8 20:02:18 2012] Detection parameters:
  Position = (318.6, 310.9) = 21 58 51.91 -30 13 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1004787.9 +/- 1240.9
  Background counts = 125.8
  Rate = 5e+01 +/- 0.06

[Fri Jun  8 20:02:18 2012] Off-axis axis estimate = 1.72'
[Fri Jun  8 20:15:06 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:15:06 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun  8 20:15:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Fri Jun  8 20:15:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  8 20:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  8 20:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  8 20:25:24 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  8 20:25:24 2012] Fit fullrun_pn_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 20:03:12 2012] Spatial fit model total counts = 826270.000000, observed total counts = 873123.000000
[Sat Jun  9 20:03:12 2012] Offset between fit and detection position for source 1 = 0.182388 pixels
[Sat Jun  9 20:03:12 2012] 825775.000000 total counts/ 25600.000000 bgd. counts: snr = 5001.093750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.182388 pixels
  Position = (318.5, 310.8) = 21 58 51.95 -30 13 32.2
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 800175.0 +/- 908.7
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Sat Jun  9 20:03:12 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:12 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 20:03:12 2012] Source does appear to be extended
[Sat Jun  9 20:03:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 20:03:43 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sat Jun  9 20:03:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.080
[Sat Jun  9 20:03:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.19"
[Sat Jun  9 20:16:56 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  9 20:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 20:16:56 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  9 20:16:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1.csv
[Sat Jun  9 20:16:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:16:57 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  9 20:16:57 2012] fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  9 20:16:57 2012] Fit fullrun_pn_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun 10 01:54:51 2012] Spatial fit model total counts = 826298.000000, observed total counts = 873123.000000
[Sun Jun 10 01:54:51 2012] Offset between fit and detection position for source 1 = 0.000289 pixels
[Sun Jun 10 01:54:51 2012] 825801.000000 total counts/ 25600.000000 bgd. counts: snr = 5001.256250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000289 pixels
  Position = (318.5, 310.8) = 21 58 51.95 -30 13 32.2
  Extent = 7.2 (7.2-7.2)", rotation angle = 0
  Source counts = 800201.0 +/- 908.7
  Background counts = 25600.0
  Rate = 3e+01 +/- 0.03
[Sun Jun 10 01:54:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 01:54:51 2012] Source does appear to be extended
[Sun Jun 10 01:54:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 01:55:07 2012] Counts = 800201.000000, rescaling region sizes by 3.000000
[Sun Jun 10 01:55:07 2012] XMMSAS src. selection expression = ellipse(27661.669600, 26989.192000, 1293.076837, 1293.076837, 0.000000, X, Y)
[Sun Jun 10 01:55:07 2012] Writing source region out to fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 10 01:55:07 2012] Extracting stamp from image fullrun_pn_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (244, 236) - (393, 385)
[Sun Jun 10 01:55:07 2012] XMMSAS bgd. selection expression = annulus(27661.669600, 26989.192000, 6465.384186, 12930.768372, X, Y) && !ellipse(26504.007263, 24221.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.020000, 23743.664000, 1143.536033, 1143.536033, 0.000000, X, Y)
[Sun Jun 10 01:55:07 2012] Writing fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 10 01:59:46 2012] Mean detx,y = (142.77, -165.45) 
[Sun Jun 10 02:00:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 02:03:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 02:03:01 2012] Setting source spectrum file to fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 02:03:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 10 05:49:50 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=26.9, arf fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 6e-11
[Sun Jun 10 05:51:00 2012] Reading fit data from xmm0411780101/analysis//spectral/fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 10 05:51:00 2012] Spectral fit parameter nH value = 9.56283e+19
[Sun Jun 10 05:51:00 2012] Spectral fit parameter PhoIndex value = 2.54096
[Sun Jun 10 05:51:00 2012] Failed to get F(0.3-8.0) from xmm0411780101/analysis//spectral/fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 10 05:51:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:51:00 2012] Using Nh = 9.6e+19, photon index=2.54, rate=26.9, arf fullrun_pn_xmm0411780101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 05:51:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:51:00 2012] Updating source flux to 4.1e-11