[Fri Jun  8 20:03:21 2012] Detection parameters:
  Position = (290.8, 193.7) = 21 59 1.26 -30 22 1.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 396.5 +/- 26.0
  Background counts = 39.6
  Rate = 0.006 +/- 0.0004

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 7.61'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 10.24"
[Fri Jun  8 21:25:12 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.24"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun  9 20:03:08 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun  9 20:03:33 2012] Spatial fit model total counts = 755.646000, observed total counts = 755.000000
[Sat Jun  9 20:03:33 2012] Offset between fit and detection position for source 5 = 0.133205 pixels
[Sat Jun  9 20:03:33 2012] 760.318000 total counts/ 473.062000 bgd. counts: snr = 13.207179
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.133205 pixels
  Position = (290.8, 193.6) = 21 59 1.24 -30 22 2.0
  Extent = 6.0 (5.3-6.9)", rotation angle = 0
  Source counts = 287.3 +/- 27.6
  Background counts = 473.1
  Rate = 0.003 +/- 0.0003
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:07:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Sat Jun  9 23:07:41 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.846
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.02"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 10 01:54:47 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun Jun 10 01:54:59 2012] Warning, spatial fit 5 centroid is now closest to src. 41
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:14 2012] XMMSAS src. selection expression = ellipse(25254.426400, 16792.958000, 360.960610, 360.960610, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing source region out to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 10 03:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (270, 173) - (312, 214)
[Sun Jun 10 03:43:14 2012] XMMSAS bgd. selection expression = annulus(25254.426400, 16792.958000, 601.601017, 1203.202035, X, Y)
[Sun Jun 10 03:43:14 2012] Writing fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5.gif
[Sun Jun 10 04:04:49 2012] Mean detx,y = (-1771.80, -10280.80) 
[Sun Jun 10 04:04:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 04:05:01 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 04:05:01 2012] Setting source spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 04:05:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src5.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 5.8e-14