[Fri Jun  8 20:03:23 2012] Detection parameters:
  Position = (261.8, 128.2) = 21 59 11.00 -30 26 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.9 +/- 18.4
  Background counts = 32.4
  Rate = 0.002 +/- 0.0002

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 12.62'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Fri Jun  8 21:25:12 2012] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.021
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.74"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun  9 20:03:08 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun  9 20:03:33 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 14.690719 pixels away
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:07:41 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Sat Jun  9 23:07:41 2012] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.021
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.74"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 10 01:54:47 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Jun 10 01:54:59 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 14.731114 pixels away
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:14 2012] XMMSAS src. selection expression = ellipse(22731.940765, 11106.520630, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing source region out to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45_src.reg
[Sun Jun 10 03:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (224, 91) - (299, 166)
[Sun Jun 10 03:43:14 2012] XMMSAS bgd. selection expression = annulus(22731.940765, 11106.520630, 1087.500000, 2175.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45.gif
[Sun Jun 10 04:07:20 2012] Mean detx,y = (-1682.54, -16480.35) 
[Sun Jun 10 04:07:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 04:07:59 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 04:08:00 2012] Setting source spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Jun 10 04:08:00 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun Jun 10 05:42:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 05:42:06 2012] rmf not generated due to insufficient counts
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Jun 10 05:49:52 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:52 2012] Using photon index=1.80, rate=0.00177, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src45.arf
[Sun Jun 10 05:49:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:52 2012] Updating source flux to 4.9e-14
[Sun Jun 10 05:50:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting