[Fri Jun  8 20:03:23 2012] Detection parameters:
  Position = (271.9, 215.4) = 21 59 7.61 -30 20 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 13.8
  Background counts = 41.4
  Rate = 0.001 +/- 0.0002

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 6.32'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Fri Jun  8 21:25:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.026
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 9.59"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun  9 20:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:33 2012] Spatial fit model total counts = 528.115000, observed total counts = 473.000000
[Sat Jun  9 20:03:33 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 20:03:33 2012] Spatial fit model total counts = -13.220500, observed total counts = 482.000000
[Sat Jun  9 20:03:33 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:33 2012] Deleting source due to low Poisson probability 0.9