[Fri Jun  8 20:03:23 2012] Detection parameters:
  Position = (500.3, 257.4) = 21 57 50.89 -30 17 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 12.9
  Background counts = 33.4
  Rate = 0.0007 +/- 0.0001

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 14.93'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 13.90 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 13.90"
[Fri Jun  8 21:25:12 2012] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.897
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 13.90"
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39.csv
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39.csv
[Sat Jun  9 20:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:09 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun  9 20:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun  9 20:03:09 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun  9 20:03:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun  9 20:03:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:33 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.436097 pixels away
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:33 2012] Deleting source due to low Poisson probability 0.8