[Fri Jun  8 20:03:21 2012] Detection parameters:
  Position = (406.3, 313.9) = 21 58 22.47 -30 13 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 354.3 +/- 23.6
  Background counts = 39.2
  Rate = 0.006 +/- 0.0004

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 7.90'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Fri Jun  8 21:25:12 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.870
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.38"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sat Jun  9 20:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:33 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.186741 pixels away
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:07:41 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sat Jun  9 23:07:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.870
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.38"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:59 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.473242 pixels away
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:14 2012] XMMSAS src. selection expression = ellipse(35303.852295, 27259.217072, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing source region out to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 10 03:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (369, 276) - (444, 351)
[Sun Jun 10 03:43:14 2012] XMMSAS bgd. selection expression = annulus(35303.852295, 27259.217072, 1087.500000, 2175.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3.gif
[Sun Jun 10 04:05:15 2012] Mean detx,y = (-6990.36, 3271.34) 
[Sun Jun 10 04:05:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 04:05:38 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 04:05:38 2012] Setting source spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 10 04:05:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 10 05:41:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 05:41:01 2012] rmf not generated due to insufficient counts
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=0.00561, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src3.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 9.2e-14
[Sun Jun 10 05:50:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting