[Fri Jun  8 20:03:22 2012] Detection parameters:
  Position = (483.2, 287.1) = 21 57 56.67 -30 15 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.7 +/- 17.9
  Background counts = 32.8
  Rate = 0.002 +/- 0.0002

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 13.42'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Fri Jun  8 21:25:12 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.989
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 13.14"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun  9 20:03:08 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Jun  9 20:03:33 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 14.698020 pixels away
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:07:41 2012] Using EEF radius (= 13.14 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 13.14"
[Sat Jun  9 23:07:41 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.989
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 13.14"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Jun 10 01:54:47 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Jun 10 01:54:59 2012] Spatial fit model total counts = 549.995000, observed total counts = 550.000000
[Sun Jun 10 01:54:59 2012] Offset between fit and detection position for source 27 = 0.264711 pixels
[Sun Jun 10 01:54:59 2012] 546.141000 total counts/ 447.604000 bgd. counts: snr = 4.657495
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.264711 pixels
  Position = (482.9, 287.2) = 21 57 56.76 -30 15 13.7
  Extent = 4.6 (3.8-5.8)", rotation angle = 0
  Source counts = 98.5 +/- 23.4
  Background counts = 447.6
  Rate = 0.001 +/- 0.0002
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 01:54:59 2012] Deleting source due to low Poisson probability 0.9