[Fri Jun  8 20:03:21 2012] Detection parameters:
  Position = (318.5, 310.9) = 21 58 51.96 -30 13 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1068398.8 +/- 1062.1
  Background counts = 69.7
  Rate = 1e+01 +/- 0.01

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 1.71'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun  8 21:25:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  9 20:03:07 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  9 20:03:08 2012] Fit fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  9 20:03:33 2012] Spatial fit model total counts = 1003610.000000, observed total counts = 962966.000000
[Sat Jun  9 20:03:33 2012] Offset between fit and detection position for source 2 = 0.183076 pixels
[Sat Jun  9 20:03:33 2012] 919462.000000 total counts/ 25600.000000 bgd. counts: snr = 5586.637500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.183076 pixels
  Position = (318.4, 310.7) = 21 58 51.99 -30 13 32.3
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 893862.0 +/- 958.9
  Background counts = 25600.0
  Rate = 9 +/- 0.01
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major axis lower bound
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 23:07:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Sat Jun  9 23:07:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.014
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.48"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:59 2012] Spatial fit model total counts = 1143630.000000, observed total counts = 963944.000000
[Sun Jun 10 01:54:59 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major axis lower bound
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:14 2012] Counts = 893862.000000, rescaling region sizes by 3.000000
[Sun Jun 10 03:43:14 2012] XMMSAS src. selection expression = ellipse(27651.670800, 26986.562600, 1346.925639, 1346.925639, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing source region out to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_src.reg
[Sun Jun 10 03:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (241, 233) - (396, 388)
[Sun Jun 10 03:43:14 2012] XMMSAS bgd. selection expression = annulus(27651.670800, 26986.562600, 6734.628194, 13469.256388, X, Y) && !ellipse(28109.474274, 26139.405365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.280365, 27147.936829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.460022, 26502.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25254.426400, 16792.958000, 481.280814, 481.280814, 0.000000, X, Y) && !ellipse(35303.852295, 27259.217072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21314.340973, 17521.213455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40212.765167, 31114.319611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16478.384323, 33601.686462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22713.395386, 32958.500305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40106.473724, 24825.261444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.090000, 39465.050000, 1806.320052, 1806.320052, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2.gif
[Sun Jun 10 03:44:37 2012] Mean detx,y = (28.05, 27.91) 
[Sun Jun 10 03:44:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 03:50:23 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 03:50:24 2012] Setting source spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 10 03:50:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=8.92, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 9.1e-11
[Sun Jun 10 05:50:04 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Sun Jun 10 05:50:41 2012] Reading fit data from xmm0411780101/analysis//spectral/fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jun 10 05:50:41 2012] Spectral fit parameter nH value = 1.08543e+20
[Sun Jun 10 05:50:41 2012] Spectral fit parameter PhoIndex value = 2.46936
[Sun Jun 10 05:50:41 2012] Failed to get F(0.3-8.0) from xmm0411780101/analysis//spectral/fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jun 10 05:50:41 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:50:41 2012] Using Nh = 1.1e+20, photon index=2.47, rate=8.92, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src2.arf
[Sun Jun 10 05:50:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:50:41 2012] Updating source flux to 7.4e-11