[Fri Jun  8 20:03:21 2012] Detection parameters:
  Position = (323.7, 301.0) = 21 58 50.22 -30 14 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2915.0 +/- 106.3
  Background counts = 67.6
  Rate = 0.04 +/- 0.001

[Fri Jun  8 20:03:23 2012] Off-axis axis estimate = 1.84'
[Fri Jun  8 21:25:12 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 21:25:12 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jun  8 21:25:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.522
[Fri Jun  8 21:25:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.35"
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2.csv
[Sat Jun  9 20:03:07 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun  9 20:03:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2.csv
[Sat Jun  9 20:03:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  9 20:03:08 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun  9 20:03:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jun  9 20:03:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:33 2012] Source 1 is offset by 4.742532 and -7.745892 pixels which is larger than
2 X fitted extent = 2.636501 x 2.636501, not incorporating fit results
[Sat Jun  9 20:03:33 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:33 2012] Assessing source extent using major
[Sat Jun  9 20:03:33 2012] Source does appear to be extended
[Sat Jun  9 20:03:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:33 2012] Source is confused with source 4
[Sat Jun  9 23:07:41 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 23:07:41 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Sat Jun  9 23:07:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.522
[Sat Jun  9 23:07:41 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.35"
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 10 01:54:47 2012] fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jun 10 01:54:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun Jun 10 01:54:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:59 2012] Source 1 is offset by 4.734509 and -7.745892 pixels which is larger than
2 X fitted extent = 2.705214 x 2.705214, not incorporating fit results
[Sun Jun 10 01:54:59 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:59 2012] Assessing source extent using major
[Sun Jun 10 01:54:59 2012] Source does appear to be extended
[Sun Jun 10 01:54:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 03:43:14 2012] Counts = 2914.993408, rescaling region sizes by 2.000000
[Sun Jun 10 03:43:14 2012] XMMSAS src. selection expression = ellipse(28109.474274, 26139.405365, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing source region out to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 10 03:43:14 2012] Extracting stamp from image fullrun_mos2_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (249, 226) - (399, 376)
[Sun Jun 10 03:43:14 2012] XMMSAS bgd. selection expression = annulus(28109.474274, 26139.405365, 4350.000000, 8700.000000, X, Y) && !ellipse(27651.670800, 26986.562600, 1795.900852, 1795.900852, 0.000000, X, Y) && !ellipse(28673.280365, 27147.936829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28470.460022, 26502.223083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35303.852295, 27259.217072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21314.340973, 17521.213455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22713.395386, 32958.500305, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 10 03:43:14 2012] Writing fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1.gif
[Sun Jun 10 03:52:10 2012] Mean detx,y = (-11.21, 4.53) 
[Sun Jun 10 03:52:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 03:55:11 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 03:55:12 2012] Setting source spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 03:55:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 10 04:17:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 04:17:13 2012] rmf not generated due to insufficient counts
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=0.0383, arf fullrun_mos2_xmm0411780101_pi300-10000_pass1_cl_src1.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 4.5e-13
[Sun Jun 10 05:50:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting