[Fri Jun 8 20:02:43 2012] Detection parameters: Position = (461.4, 286.8) = 21 58 3.99 -30 15 18.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 181.3 +/- 18.6 Background counts = 36.5 Rate = 0.003 +/- 0.0003 [Fri Jun 8 20:02:44 2012] Off-axis axis estimate = 11.84' [Fri Jun 8 20:25:24 2012] Using EEF radius (= 12.35 ")to estimate initial spatial extent for simple fitting [Fri Jun 8 20:25:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 8 20:25:24 2012] Initial guess for spatial extent in simple fitting = 12.35" [Fri Jun 8 20:25:24 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.099 [Fri Jun 8 20:25:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.35" [Fri Jun 8 21:25:11 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3.ximg exists [Fri Jun 8 21:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3.csv [Fri Jun 8 21:25:11 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3_1.ximg exists [Fri Jun 8 21:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3.csv [Fri Jun 8 21:25:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Fri Jun 8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Fri Jun 8 21:25:12 2012] Fit fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Sat Jun 9 20:03:21 2012] Spatial fit model total counts = 607.938000, observed total counts = 577.000000 [Sat Jun 9 20:03:21 2012] Offset between fit and detection position for source 8 = 0.298212 pixels [Sat Jun 9 20:03:21 2012] 603.551000 total counts/ 496.576000 bgd. counts: snr = 4.800533 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.298212 pixels Position = (461.2, 286.5) = 21 58 4.04 -30 15 17.0 Extent = 5.0 (3.5-7.0)", rotation angle = 0 Source counts = 107.0 +/- 24.6 Background counts = 496.6 Rate = 0.001 +/- 0.0002 [Sat Jun 9 20:03:21 2012] Vigneting correction estimate = 1.000000 [Sat Jun 9 20:03:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 9 20:03:21 2012] Assessing source extent using major axis lower bound [Sat Jun 9 20:03:21 2012] Source does appear to be extended [Sat Jun 9 20:03:21 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 9 20:03:21 2012] Deleting source due to low Poisson probability 1.0