[Fri Jun  8 20:02:43 2012] Detection parameters:
  Position = (406.3, 314.0) = 21 58 22.47 -30 13 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360.3 +/- 23.5
  Background counts = 44.4
  Rate = 0.005 +/- 0.0003

[Fri Jun  8 20:02:44 2012] Off-axis axis estimate = 7.90'
[Fri Jun  8 20:25:24 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:25:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  8 20:25:24 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Fri Jun  8 20:25:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.780
[Fri Jun  8 20:25:24 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.38"
[Fri Jun  8 21:25:11 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  8 21:25:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 21:25:11 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  8 21:25:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  8 21:25:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  8 21:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:21 2012] Warning, spatial fit 2 centroid is now closest to src. 23
[Sat Jun  9 20:03:21 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.315604 pixels away
[Sat Jun  9 20:03:21 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:21 2012] Assessing source extent using major
[Sat Jun  9 20:03:21 2012] Source does appear to be extended
[Sat Jun  9 20:03:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:16:57 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Sat Jun  9 20:16:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun  9 20:16:57 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Sat Jun  9 20:16:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 26, frac = 0.780
[Sat Jun  9 20:16:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.38"
[Sat Jun  9 23:07:41 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun  9 23:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 23:07:41 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun  9 23:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2.csv
[Sat Jun  9 23:07:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 23:07:41 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun  9 23:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 23:07:41 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun  9 23:07:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun  9 23:07:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 10 01:54:54 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.865049 pixels away
[Sun Jun 10 01:54:54 2012] Vigneting correction estimate = 1.000000
[Sun Jun 10 01:54:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 10 01:54:54 2012] Assessing source extent using major
[Sun Jun 10 01:54:54 2012] Source does appear to be extended
[Sun Jun 10 01:54:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 10 02:35:06 2012] XMMSAS src. selection expression = ellipse(35303.151367, 27266.473267, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 10 02:35:06 2012] Writing source region out to fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 10 02:35:06 2012] Extracting stamp from image fullrun_mos1_xmm0411780101_pi300-10000_cl_sm2.00.img.gz, (369, 276) - (444, 351)
[Sun Jun 10 02:35:06 2012] XMMSAS bgd. selection expression = annulus(35303.151367, 27266.473267, 1087.500000, 2175.000000, X, Y)
[Sun Jun 10 02:35:06 2012] Writing fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6.gif
[Sun Jun 10 02:41:56 2012] Mean detx,y = (3455.45, 6843.35) 
[Sun Jun 10 02:42:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 10 02:42:26 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 10 02:42:27 2012] Setting source spectrum file to fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 10 02:42:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 10 03:42:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 10 03:42:38 2012] rmf not generated due to insufficient counts
[Sun Jun 10 05:49:51 2012] Updating aperture counts using extracted products
[Sun Jun 10 05:49:51 2012] Error reading totcts from fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 10 05:49:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 10 05:49:51 2012] Using photon index=1.80, rate=0.00522, arf fullrun_mos1_xmm0411780101_pi300-10000_pass1_cl_src6.arf
[Sun Jun 10 05:49:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 10 05:49:51 2012] Updating source flux to 7.6e-14
[Sun Jun 10 05:49:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting