[Fri Jun  8 20:02:43 2012] Detection parameters:
  Position = (270.3, 407.2) = 21 59 8.12 -30 6 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.1 +/- 11.2
  Background counts = 34.7
  Rate = 0.0005 +/- 0.0001

[Fri Jun  8 20:02:44 2012] Off-axis axis estimate = 8.15'
[Fri Jun  8 20:25:24 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun  8 20:25:24 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Fri Jun  8 20:25:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.001
[Fri Jun  8 20:25:24 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.50"
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30.csv
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30.csv
[Fri Jun  8 21:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun  8 21:25:12 2012] fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jun  8 21:25:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jun  8 21:25:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411780101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  9 20:03:21 2012] Spatial fit model total counts = 404.682000, observed total counts = 308.000000
[Sat Jun  9 20:03:21 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  9 20:03:21 2012] Vigneting correction estimate = 1.000000
[Sat Jun  9 20:03:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  9 20:03:21 2012] Assessing source extent using major
[Sat Jun  9 20:03:21 2012] Source does appear to be extended
[Sat Jun  9 20:03:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  9 20:03:21 2012] Deleting source due to low Poisson probability 0.8