[Sun Jun 17 23:18:24 2012] Detection parameters:
  Position = (273.7, 395.0) = 11 4 38.63 38 17 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.3 +/- 15.4
  Background counts = 15.4
  Rate = 0.02 +/- 0.002

[Sun Jun 17 23:18:25 2012] Off-axis axis estimate = 7.23'
[Sun Jun 17 23:19:38 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 23:19:38 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Sun Jun 17 23:19:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.951
[Sun Jun 17 23:19:38 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.04"
[Mon Jun 18 03:09:21 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun 18 03:09:21 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun 18 03:09:21 2012] Fit fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_src14 appears to have run properly
[Mon Jun 18 03:09:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun 18 03:09:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun 18 03:09:22 2012] Fit fullrun_mos1_xmm0411082701_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jun 18 03:09:26 2012] Spatial fit model total counts = 480.529000, observed total counts = 449.000000
[Mon Jun 18 03:09:26 2012] Offset between fit and detection position for source 14 = 0.335754 pixels
[Mon Jun 18 03:09:26 2012] 458.301000 total counts/ 249.328000 bgd. counts: snr = 13.234412
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.335754 pixels
  Position = (274.0, 395.0) = 11 4 38.51 38 17 55.3
  Extent = 12.4 (9.9-15.6)", rotation angle = 0
  Source counts = 209.0 +/- 21.4
  Background counts = 249.3
  Rate = 0.03 +/- 0.003
[Mon Jun 18 03:09:26 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 03:09:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 03:09:26 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 03:09:26 2012] Source does appear to be extended
[Mon Jun 18 03:09:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 03:09:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 03:09:28 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Mon Jun 18 03:09:28 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.796
[Mon Jun 18 03:09:28 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.45"
[Mon Jun 18 03:45:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 18 03:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 03:45:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 18 03:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 03:45:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 03:45:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 18 03:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 03:45:22 2012] fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 18 03:45:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 03:45:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411082701_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 03:45:24 2012] Spatial fit model total counts = 601.067000, observed total counts = 542.000000
[Mon Jun 18 03:45:24 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 03:45:24 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 03:45:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 03:45:24 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 03:45:24 2012] Source does appear to be extended
[Mon Jun 18 03:45:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 03:45:25 2012] XMMSAS src. selection expression = ellipse(23791.308200, 34318.093800, 746.958021, 746.958021, 0.000000, X, Y)
[Mon Jun 18 03:45:25 2012] Writing source region out to fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14_src.reg
[Mon Jun 18 03:45:25 2012] Extracting stamp from image fullrun_mos1_xmm0411082701_pi300-10000_cl_sm2.00.img.gz, (231, 352) - (317, 438)
[Mon Jun 18 03:45:25 2012] XMMSAS bgd. selection expression = annulus(23791.308200, 34318.093800, 1244.930036, 2489.860072, X, Y) && !ellipse(23038.734000, 36049.148000, 1610.552046, 1610.552046, 0.000000, X, Y) && !ellipse(23307.220000, 35539.200000, 1653.248048, 1653.248048, 0.000000, X, Y)
[Mon Jun 18 03:45:25 2012] Writing fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14.gif
[Mon Jun 18 03:47:30 2012] Mean detx,y = (7238.12, -126.27) 
[Mon Jun 18 03:47:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 03:47:42 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 03:47:42 2012] Setting source spectrum file to fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 18 03:47:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jun 18 04:21:45 2012] Updating aperture counts using extracted products
[Mon Jun 18 04:21:45 2012] Error reading totcts from fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 18 04:21:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 04:21:45 2012] Using photon index=1.80, rate=0.0273, arf fullrun_mos1_xmm0411082701_pi300-10000_pass1_cl_src14.arf
[Mon Jun 18 04:21:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 04:21:45 2012] Updating source flux to 4.4e-13
[Mon Jun 18 04:21:46 2012] Flag p found in src. 14 procflags, skipping spectral fitting