[Thu Jul  4 10:27:36 2013] Detection parameters:
  Position = (293.5, 344.7) = 11 4 27.85 38 14 19.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 10.1
  Background counts = 18.0
  Rate = 0.03 +/- 0.006

[Thu Jul  4 10:27:36 2013] Off-axis axis estimate = 3.37'
[Thu Jul  4 10:27:49 2013] Using EEF radius (= 8.11 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:27:49 2013] Initial guess for spatial extent in simple fitting = 8.11"
[Thu Jul  4 10:27:49 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.715
[Thu Jul  4 10:27:49 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.11"
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13.csv
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13.csv
[Thu Jul  4 10:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Jul  4 10:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:58 2013] Warning, spatial fit 13 centroid is now closest to src. 10
[Thu Jul  4 10:27:58 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 10:27:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 10:27:58 2013] Assessing source extent using major
[Thu Jul  4 10:27:58 2013] Source does appear to be extended
[Thu Jul  4 10:27:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 10:27:58 2013] Deleting source due to low Poisson probability 0.9