[Thu Jul  4 10:27:36 2013] Detection parameters:
  Position = (321.2, 309.3) = 11 4 17.65 38 11 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.8 +/- 15.9
  Background counts = 18.7
  Rate = 0.06 +/- 0.008

[Thu Jul  4 10:27:36 2013] Off-axis axis estimate = 1.83'
[Thu Jul  4 10:27:49 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:27:49 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Thu Jul  4 10:27:49 2013] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.992
[Thu Jul  4 10:27:49 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.34"
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7.csv
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7.csv
[Thu Jul  4 10:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jul  4 10:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:58 2013] Spatial fit model total counts = 266.417000, observed total counts = 237.000000
[Thu Jul  4 10:27:58 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 10:27:58 2013] Spatial fit model total counts = 345.334000, observed total counts = 324.000000
[Thu Jul  4 10:27:58 2013] Offset between fit and detection position for source 7 = 0.742461 pixels
[Thu Jul  4 10:27:58 2013] Warning, changing simple spatial fit ID from 7 to 11
[Thu Jul  4 10:27:58 2013] 331.868500 total counts/ 313.953000 bgd. counts: snr = 1.011106
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.742461 pixels
  Position = (320.4, 309.4) = 11 4 17.92 38 11 50.7
  Extent = 4.3 (1.8-8.6)", rotation angle = 0
  Source counts = 17.9 +/- 18.2
  Background counts = 314.0
  Rate = 0.02 +/- 0.02
  Deleting source due to low Poisson probability