[Thu Jul  4 10:27:36 2013] Detection parameters:
  Position = (273.3, 317.8) = 11 4 35.33 38 12 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 13.9
  Background counts = 17.7
  Rate = 0.04 +/- 0.007

[Thu Jul  4 10:27:36 2013] Off-axis axis estimate = 2.31'
[Thu Jul  4 10:27:49 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:27:49 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Thu Jul  4 10:27:49 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Thu Jul  4 10:27:49 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.58"
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10.csv
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Jul  4 10:27:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10.csv
[Thu Jul  4 10:27:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Jul  4 10:27:50 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jul  4 10:27:50 2013] Fit fullrun_mos2_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jul  4 10:27:58 2013] Source 12 is offset by 5.947790 and 0.573794 pixels which is larger than
2 X fitted extent = 2.862437 x 2.862437, not incorporating fit results
[Thu Jul  4 10:27:58 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 10:27:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 10:27:58 2013] Assessing source extent using major
[Thu Jul  4 10:27:58 2013] Source does appear to be extended
[Thu Jul  4 10:27:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 10:28:06 2013] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:28:06 2013] Initial guess for spatial extent in simple fitting = 7.58"
[Thu Jul  4 10:28:06 2013] source mask rpix=1.7, npix_max = 20, mask sum = 14, frac = 0.696
[Thu Jul  4 10:28:06 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.58"
[Thu Jul  4 10:28:06 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jul  4 10:28:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8.csv
[Thu Jul  4 10:28:06 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jul  4 10:28:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8.csv
[Thu Jul  4 10:28:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:28:06 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jul  4 10:28:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul  4 10:28:06 2013] fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jul  4 10:28:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Jul  4 10:28:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:28:13 2013] Spatial fit model total counts = -6.724660, observed total counts = 291.000000
[Thu Jul  4 10:28:13 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  4 10:28:13 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 10:28:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 10:28:13 2013] Assessing source extent using major
[Thu Jul  4 10:28:13 2013] Source does appear to be extended
[Thu Jul  4 10:28:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 10:28:13 2013] Deleting source due to low Poisson probability 0.9