[Thu Jul  4 10:27:36 2013] Detection parameters:
  Position = (270.4, 307.8) = 11 4 36.39 38 11 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 10.7
  Background counts = 17.6
  Rate = 0.02 +/- 0.006

[Thu Jul  4 10:27:36 2013] Off-axis axis estimate = 2.14'
[Thu Jul  4 10:27:49 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:27:49 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Thu Jul  4 10:27:49 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Thu Jul  4 10:27:49 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.50"
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11.ximg exists
[Thu Jul  4 10:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11.csv
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Jul  4 10:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11.csv
[Thu Jul  4 10:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Jul  4 10:27:49 2013] Fit fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Jul  4 10:27:56 2013] Spatial fit model total counts = 205.886000, observed total counts = 206.000000
[Thu Jul  4 10:27:56 2013] Offset between fit and detection position for source 9 = 0.933495 pixels
[Thu Jul  4 10:27:56 2013] Warning, changing simple spatial fit ID from 11 to 6
[Thu Jul  4 10:27:56 2013] 215.338610 total counts/ 206.070000 bgd. counts: snr = 0.645665
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.933495 pixels
  Position = (270.4, 306.8) = 11 4 36.39 38 11 39.3
  Extent = 2.7 (1.8-4.8)", rotation angle = 0
  Source counts = 9.3 +/- 14.7
  Background counts = 206.1
  Rate = 0.01 +/- 0.02
  Deleting source due to low Poisson probability