[Thu Jul  4 10:27:36 2013] Detection parameters:
  Position = (296.0, 320.9) = 11 4 26.95 38 12 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11624.6 +/- 130.1
  Background counts = 21.9
  Rate = 5 +/- 0.06

[Thu Jul  4 10:27:36 2013] Off-axis axis estimate = 1.64'
[Thu Jul  4 10:27:49 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:27:49 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Thu Jul  4 10:27:49 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Thu Jul  4 10:27:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul  4 10:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul  4 10:27:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1.csv
[Thu Jul  4 10:27:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul  4 10:27:49 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul  4 10:27:49 2013] Fit fullrun_mos1_xmm0411081701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul  4 10:27:56 2013] Spatial fit model total counts = 13669.400000, observed total counts = 13675.000000
[Thu Jul  4 10:27:56 2013] Offset between fit and detection position for source 2 = 2.161184 pixels
[Thu Jul  4 10:27:56 2013] 13708.370000 total counts/ 2518.670000 bgd. counts: snr = 222.963005
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.161184 pixels
  Position = (295.0, 319.0) = 11 4 27.31 38 12 32.0
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source counts = 11189.7 +/- 117.1
  Background counts = 2518.7
  Rate = 1e+01 +/- 0.1
[Thu Jul  4 10:27:56 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 10:27:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 10:27:56 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 10:27:56 2013] Source does appear to be extended
[Thu Jul  4 10:27:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 10:28:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  4 10:28:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  4 10:28:05 2013] Initial guess for spatial extent in simple fitting = 14.49"
[Thu Jul  4 10:28:05 2013] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090
[Thu Jul  4 10:28:05 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Thu Jul  4 10:28:05 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul  4 10:28:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  4 10:28:05 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul  4 10:28:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1.csv
[Thu Jul  4 10:28:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  4 10:28:06 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul  4 10:28:06 2013] fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul  4 10:28:06 2013] Fit fullrun_mos1_xmm0411081701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul  4 10:28:12 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Thu Jul  4 10:28:12 2013] Vigneting correction estimate = 1.000000
[Thu Jul  4 10:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  4 10:28:12 2013] Assessing source extent using major axis lower bound
[Thu Jul  4 10:28:12 2013] Source does appear to be extended
[Thu Jul  4 10:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  4 11:20:53 2013] Counts = 11189.700000, rescaling region sizes by 3.000000
[Thu Jul  4 11:20:53 2013] XMMSAS src. selection expression = ellipse(25616.268400, 27700.386000, 2608.632075, 2608.632075, 0.000000, X, Y)
[Thu Jul  4 11:20:53 2013] Writing source region out to fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_src.reg
[Thu Jul  4 11:20:53 2013] Extracting stamp from image fullrun_mos1_xmm0411081701_pi300-10000_cl_sm2.00.img.gz, (145, 169) - (445, 469)
[Thu Jul  4 11:20:53 2013] XMMSAS bgd. selection expression = annulus(25616.268400, 27700.386000, 13043.160375, 26086.320751, X, Y) && !ellipse(24987.350983, 29129.868408, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26317.143646, 29515.216705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24636.828705, 29779.535492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24080.292084, 26064.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27659.329987, 28717.574219, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul  4 11:20:53 2013] Writing fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2.gif
[Thu Jul  4 11:20:55 2013] Mean detx,y = (199.59, -517.57) 
[Thu Jul  4 11:20:56 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  4 11:26:34 2013] Binned source spectrum to 10 counts/bin
[Thu Jul  4 11:26:34 2013] Setting source spectrum file to fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jul  4 11:26:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jul  4 12:27:06 2013] Updating aperture counts using extracted products
[Thu Jul  4 12:27:06 2013] Total counts from fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 20397.00
[Thu Jul  4 12:27:06 2013] Total counts from fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 3931.00
[Thu Jul  4 12:27:06 2013] Got source and background scale factors 21118280.000000, 282343263.000000
[Thu Jul  4 12:27:06 2013] User source parameters:
  Position = (295.0, 319.0) = 11 4 27.31 38 12 32.0
  Extent = 14.5 (14.5-14.5)", rotation angle = 0
  Source aperture counts = 20103.0 +/- 143.8
  Background aperture counts = 294.0
  Rate = 2e+01 +/- 0.1

[Thu Jul  4 12:27:07 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jul  4 12:27:07 2013] Using photon index=1.80, rate=11.5, arf fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2.arf
[Thu Jul  4 12:27:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  4 12:27:07 2013] Updating source flux to 1e-10
[Thu Jul  4 12:27:10 2013] xmm0411081701/analysis//spectral/fullrun_mos1_xmm0411081701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete