[Sat Jun 30 10:09:26 2012] Detection parameters:
  Position = (314.1, 296.1) = 11 4 20.86 38 10 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3199.8 +/- 72.7
  Background counts = 81.6
  Rate = 0.6 +/- 0.01

[Sat Jun 30 10:09:26 2012] Off-axis axis estimate = 1.15'
[Sat Jun 30 10:11:53 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sat Jun 30 10:11:53 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sat Jun 30 10:11:53 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sat Jun 30 10:11:53 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.00"
[Sat Jun 30 13:18:24 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23.ximg exists
[Sat Jun 30 13:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23.csv
[Sat Jun 30 13:18:24 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Jun 30 13:18:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23.csv
[Sat Jun 30 13:18:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 13:18:25 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Jun 30 13:18:25 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jun 30 13:18:25 2012] Fit fullrun_pn_xmm0411081601_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Jun 30 16:56:48 2012] Spatial fit model total counts = 12680.300000, observed total counts = 12661.000000
[Sat Jun 30 16:56:48 2012] Offset between fit and detection position for source 24 = 7.004120 pixels
[Sat Jun 30 16:56:48 2012] 12685.050000 total counts/ 7357.500000 bgd. counts: snr = 62.110124
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 7.004120 pixels
  Position = (310.0, 301.7) = 11 4 22.37 38 11 14.5
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 5327.6 +/- 112.6
  Background counts = 7357.5
  Rate = 0.8 +/- 0.02
[Sat Jun 30 16:56:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 16:56:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 16:56:49 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 16:56:49 2012] Source does appear to be extended
[Sat Jun 30 16:56:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 16:57:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 30 16:57:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 30 16:57:03 2012] Initial guess for spatial extent in simple fitting = 14.01"
[Sat Jun 30 16:57:03 2012] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.012
[Sat Jun 30 16:57:03 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 14.01"
[Sat Jun 30 20:17:26 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13.ximg exists
[Sat Jun 30 20:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13.csv
[Sat Jun 30 20:17:26 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Jun 30 20:17:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13.csv
[Sat Jun 30 20:17:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 30 20:17:27 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Jun 30 20:17:27 2012] fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Jun 30 20:17:27 2012] Fit fullrun_pn_xmm0411081601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Jun 30 22:05:15 2012] Warning, spatial fit 13 centroid is now closest to src. 19
[Sat Jun 30 22:05:15 2012] Vigneting correction estimate = 1.000000
[Sat Jun 30 22:05:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 30 22:05:15 2012] Assessing source extent using major axis lower bound
[Sat Jun 30 22:05:15 2012] Source does appear to be extended
[Sat Jun 30 22:05:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 30 22:05:15 2012] Source is confused with source 26
[Sat Jun 30 22:05:28 2012] Counts = 5327.550000, rescaling region sizes by 2.000000
[Sat Jun 30 22:05:28 2012] XMMSAS src. selection expression = ellipse(26921.276000, 26202.978000, 1680.744048, 1680.744048, 0.000000, X, Y)
[Sat Jun 30 22:05:28 2012] Writing source region out to fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 30 22:05:28 2012] Extracting stamp from image fullrun_pn_xmm0411081601_pi300-10000_cl_sm2.00.img.gz, (213, 205) - (407, 398)
[Sat Jun 30 22:05:28 2012] XMMSAS bgd. selection expression = annulus(26921.276000, 26202.978000, 5602.480161, 11204.960322, X, Y) && !ellipse(25747.821600, 27773.546860, 3298.344095, 3298.344095, 0.000000, X, Y) && !ellipse(21862.261600, 30485.455600, 434.476813, 434.476813, 0.000000, X, Y) && !ellipse(26516.339874, 29986.205627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.280884, 29722.805481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25190.609406, 29041.368317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24766.529541, 28759.964417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.783478, 28350.763336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23664.195892, 27852.247070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23506.407501, 26651.000305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24214.795868, 25917.970612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27511.550377, 25400.614616, 2289.120066, 405.600945, 53.233577, X, Y) && !ellipse(27863.782000, 24922.970000, 1144.560033, 1144.560033, 0.000000, X, Y) && !ellipse(28147.046000, 24520.748000, 1175.072034, 1175.072034, 0.000000, X, Y) && !ellipse(28444.258000, 24125.256000, 1276.392037, 1276.392037, 0.000000, X, Y) && !ellipse(28913.904000, 23473.414000, 1279.288037, 1279.288037, 0.000000, X, Y) && !ellipse(29129.170092, 23271.177261, 2690.857532, 1012.161548, 246.170967, X, Y) && !ellipse(29426.172000, 22841.890000, 6102.408176, 6102.408176, 0.000000, X, Y) && !ellipse(29945.282000, 22076.836000, 1432.128041, 1432.128041, 0.000000, X, Y) && !ellipse(30387.418000, 21539.510000, 1403.528040, 1403.528040, 0.000000, X, Y) && !ellipse(31661.042119, 19808.311288, 1631.640047, 436.176220, 52.649641, X, Y) && !ellipse(32041.356000, 19291.144000, 1699.400049, 1699.400049, 0.000000, X, Y) && !ellipse(33066.384000, 17927.502000, 1797.736052, 1230.104035, 69.286400, X, Y) && !ellipse(33145.297400, 17803.134200, 1755.392051, 434.807213, 52.424700, X, Y) && !ellipse(33506.893400, 17318.039400, 1797.736052, 433.956812, 52.082300, X, Y) && !ellipse(34202.601898, 16344.049133, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 30 22:05:28 2012] Writing fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24.gif
[Sat Jun 30 22:23:34 2012] Mean detx,y = (-80.83, 902.30) 
[Sat Jun 30 22:23:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 30 22:26:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 30 22:26:02 2012] Setting source spectrum file to fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 30 22:26:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jul  1 11:05:13 2012] Updating aperture counts using extracted products
[Sun Jul  1 11:05:13 2012] Error reading totcts from fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jul  1 11:05:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  1 11:05:13 2012] Using photon index=1.80, rate=0.802, arf fullrun_pn_xmm0411081601_pi300-10000_pass1_cl_src24.arf
[Sun Jul  1 11:05:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  1 11:05:13 2012] Updating source flux to 1.9e-12
[Sun Jul  1 11:07:22 2012] Flag c found in src. 24 procflags, skipping spectral fitting